Aircraft Gearbox Market Forecasts to 2028 – Global Analysis By Fit (Linefit, Retrofit), Component (Housing, Gear, Bearings, Covers, Shafts, Other Components), Aircraft Type (Military Aviation, Civil Aviation, Commercial Aircraft), Gearbox Type (Tail Rotor Gearbox, Accessory Gearbox, Auxiliary Power Unit Gearbox, Actuation Gearbox, Reduction Gearbox, Other Gearbox Types), Application (Airframe, Engine, Other Applications), End User (Airline Operators, Original Equipment Manufacturer (OEMs), Maintenance, Repair & Operations (MROs), Other End Users), and Geography
According to Stratistics MRC, the Global Aircraft Gearbox Market is accounted for $2.8 billion in 2022 and is expected to reach $4.7 billion by 2028 growing at a CAGR of 8.9% during the forecast period. The term ""gearbox"" generally refers to the internal transmission system seen in aircraft. The main purpose of this is to regulate and adjust the engine's rotational speed. These gadgets can be operated manually or automatically. A massive and weighty setup is required in order to manufacture or develop the aeroplane gearbox. It calls for performing market research, as well as designing and developing processes for assembling a short-range airliner.
According to the Aircraft Owners and Pilot Association (AOPA), there were around 827 000 active and certified pilots in 1980 that, grew out to be 905600 30 years later, which wasn’t that significant. Still, growth could be seen around the corner. The AOPA has been trying to develop a network of flying associations and aviation under control.
Market Dynamics:
Driver:
Demands lightweight engines
The most important part of the transmission system for varying rotational speed and essential to a functioning engine is the aeroplane gearbox. It is applied to change a motor's speed (RPM) or to boost output torque. Shafts connect the gearbox, and the internal arrangement of a gearbox determines the outputs speed and torque. Modern lightweight engines with great efficiency and increased performance are required by the aviation sector. As a result, the market is growing.
Restraint:
Awareness about environmentally-friendly vehicles
The aviation sector has been severely impacted by the increased awareness of environmentally friendly vehicles. This popularity will have an impact on the development of aircraft gearboxes and motivate industry participants to launch distinctive, environmentally friendly gearboxes in the years to come.
Opportunity:
Rising collaborations of market players
Lucrative opportunities have emerged in the aircraft gearbox sector as a result of the rise in partnerships between industry titans to discover more environmentally friendly methods of flight. A number of businesses have established competitions to develop effective aviation engines and save maintenance expenses. Such corporate cooperation would help the aviation sector transition to a greener future and increase its sustainability.
Threat:
Spalling, frosting and manufacturing defects
A gearbox's main function is to consistently power is transmitted and rotational movement between such a prime mover and a piece of machinery being driven while maintaining an acceptable degree of temperature, vibration, and noise. Excessive wear or a higher level breakage may be to blame for gear failure. Frosting, spalling, and manufacturing flaws are the main causes of aviation gearbox faults. Pits caused by spalling have a big diameter and are shallow. Both heavily loaded, hardened steel material and medium hardness materials are prone to it. Spalling is caused by very high contact stresses; pits quickly separate and create sizable irregular voids. It is possible to lower contact stress below the material's endurance limit, which prevents pits from forming on the gear surface.
Covid-19 Impact
The COVID-19 epidemic significantly impacted the world economy and set the way for numerous business-related hurdles. A gearbox in an aircraft faced previously unheard-of issues as a result of the crisis's adverse effects on air travel. Passenger requirements fell as a result of the harsh travel limitations. But, as a result of these hurdles currently being removed, the market outlook is probably going to pick up speed in the upcoming years.
The tail rotor gearbox segment is expected to be the largest during the forecast period
The tail rotor gearbox segment is estimated to have a lucrative growth. An aircraft's tail rotor receives power from an engine through a tail rotor gearbox. In order to allow the tail rotor to rotate more gradually than the engine, it also functions as a gear reducer. Moreover, it serves as a torque multiplier, enabling the engine to rotate the tail rotor more gradually than it otherwise could have done if the tail rotor were linked directly to the engine.
The engine segment is expected to have the highest CAGR during the forecast period
The engine segment is anticipated to witness the fastest CAGR growth during the forecast period, due to the increasing requirement for powerful engines and related components, the market for aeroplane gearboxes is growing. The airplane's engines are its most important component since they help to produce the thrust required to propel the wings, which give the aircraft lift. These aeroplane engines receive help from gearboxes to produce strong thrust, which moves the aircraft forward. Due to the increased need for powerful engines and their related components, the market for aeroplane gearboxes is expanding. Engine thrust is heavily needed throughout landing and takeoff. The turboprop, turbofan, turbo shaft, and piston engine categories are further subcategories for the engine segment. Many propellers lowering units in turboprop engines and the expanding use of piston engines in various applications are influencing the market's revenue growth.
Region with highest share:
Asia Pacific is projected to hold the largest market share during the forecast period owing to rising demand from developing nations like China and India. Additionally, it is projected that a combination of rising disposable income and an increase in passenger volume will fuel demand for commercial aircraft and propel the sector as a whole. IATA also predicts that China will soon overtake the United States as the world's top hub for commercial aviation, forcing the purchase of additional aircraft to keep up with the increase in passenger traffic. In addition, a number of new business jets are being introduced as a result of the expansion of the high net worth individual (HNWI) population in the area, which incorporates newer engine models for sustained flight over a greater distance and complies with changing emission standards in the area.
Region with highest CAGR:
Europe is projected to have the highest CAGR over the forecast period, owing to the high consumption of gearboxes in the aerospace industry, particularly within the German and UK aviation industries. Leading aircraft OEMs like Airbus S.A.S. are anticipated to fuel market expansion in the region of Europe. The European Union (EU) is heavily active in R&D in the aerospace industry and is home to a number of aircraft engine original equipment manufacturers. The efforts to collaborate with suppliers have resulted in the creation of international networks, which have improved the industry's general capabilities even more.
Key players in the market
Some of the key players profiled in the Aircraft Gearbox Market include Airbus Helicopters, Raytheon Technologies Corporation, CEF Industries, LLC, Triumph Group, Aero Gear, Inc., Northstar Aerospace, Liebherr, Rolls-Royce plc, Safran, SKF Group, United Technologies Corporation (UTC), Rexnord Aerospace, The Timken Company and B & B Specialties, Inc.
Key Developments:
In June 2021, Airbus Helicopters, a French-based manufacturer of commercial aircraft, signed an agreement with ZF Friedrichshafen AG, a German-based company that provides technology to the automotive sector, to acquire ZF Luftfahrttechnik GmbH for an undisclosed amount.
Fits Covered:
• Linefit
• Retrofit
Components Covered:
• Housing
• Gear
• Bearings
• Covers
• Shafts
• Other Components
Aircraft Types Covered:
• Military Aviation
• Civil Aviation
• Commercial Aircraft
Gearbox Types Covered:
• Tail Rotor Gearbox
• Accessory Gearbox
• Auxiliary Power Unit Gearbox
• Actuation Gearbox
• Reduction Gearbox
• Other Gearbox Types
Applications Covered:
• Airframe
• Engine
• Other Applications
End Users Covered:
• Airline Operators
• Original Equipment Manufacturer (OEMs)
• Maintenance, Repair & Operations (MROs)
• Other End Users
Regions Covered:
• North America
US
Canada
Mexico
• Europe
Germany
UK
Italy
France
Spain
Rest of Europe
• Asia Pacific
Japan
China
India
Australia
New Zealand
South Korea
Rest of Asia Pacific
• South America
Argentina
Brazil
Chile
Rest of South America
• Middle East & Africa
Saudi Arabia
UAE
Qatar
South Africa
Rest of Middle East & Africa
What our report offers:
- Market share assessments for the regional and country-level segments
- Strategic recommendations for the new entrants
- Covers Market data for the years 2020, 2021, 2022, 2025, and 2028
- Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations)
- Strategic recommendations in key business segments based on the market estimations
- Competitive landscaping mapping the key common trends
- Company profiling with detailed strategies, financials, and recent developments
- Supply chain trends mapping the latest technological advancements
Learn how to effectively navigate the market research process to help guide your organization on the journey to success.
Download eBook