Synthetic Rubber - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2024 - 2029)

Asia-Pacific Syngas - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2024 - 2029)


The Asia-Pacific Syngas Market size is estimated at 125.65 Million metric normal cubic meters per hour (mm nm³/h) in 2024, and is expected to reach 239.24 Million metric normal cubic meters per hour (mm nm³/h) by 2029, growing at a CAGR of greater than 13.5% during the forecast period (2024-2029).

Key Highlights

  • The Asia-Pacific Sngas market was negatively affected by the COVID-19 pandemic. China was worst hit by the COVID pandemic in the region. The pandemic resulted in the closure of chemical production plants in countries like India and China, thereby affecting the market for syngas. However, the market recovered well after the restrictions were lifted. The market recovered significantly, owing to the rise in consumption of syngas in power generation and chemical industries.
  • The growing demand for syngas from the electricity and chemical industry, increasing environmental awareness and government regulations on renewable fuel use, and increasing hydrogen demand for fertilizers are expected to drive the growth of the market.
  • The syngas production plant setup requires high capital investment and funding, which is expected to hinder market growth.
  • The development of underground coal gasification technology is likely to act as an opportunity in the future.
  • China is expected to dominate the market due to the rising demand for syngas in the power generation and chemical industries. It is also expected to register the highest CAGR during the forecast period.

Asia Pacific Syngas Market Trends

Ammonia Application Segment to Dominate the Market

  • Syngas is a byproduct of the industrial synthesis of ammonia and fertilizer. Throughout this process, methane (from natural gas) reacts with water to produce carbon monoxide, and hydrogen (from natural gas) reacts with water to produce carbon monoxide and hydrogen. The gasification process is used to transform any carbon-containing substance into longer hydrocarbon chains.
  • Through the Haber-Bosch process, syngas can be turned into ammonia, which is a standard part of fertilizers. During this process, nitrogen from the air is mixed with hydrogen from the syngas to make ammonia, which can then be used to make different kinds of fertilizers.
  • Using syngas as a source of raw materials to make fertilizer has a number of advantages. For example, syngas can be made from a number of different materials, which gives companies more options and makes them less reliant on a single raw material. Also, making syngas from biomass by gasifying it can help cut down on greenhouse gas emissions compared to making fertilizer from fossil fuels.
  • China accounts for approximately 7% of the overall agricultural acreage globally, thus feeding 22% of the world’s population. The country is the largest producer of various crops, including rice, cotton, potatoes, and others. Hence, the demand for ammonia, which is used as a fertilizer, is rapidly increasing owing to the large-scale agricultural activities in the country.
  • China is the largest producer and consumer of ammonia in the world. According to the US Geological Survey (USGS), the country produced 42 million metric tons in 2022. The demand for ammonia in the country is rising due to increasing applications in the agriculture industry, such as fertilizers, textiles, pharmaceuticals, and mining.
  • Similarly, in India, the demand for ammonia is increasing in the agriculture, textile, and chemical industries. Thus, various companies are increasing their ammonia production capacity in the country. For instance, in May 2023, Deepak Fertilisers and Petrochemicals Corporation (DFPC) announced that it would be commissioning a new USD 522.5 Million ammonia plant and start production by the start of the second half of this year. The company is adding a capacity of 5,00,000 million tonnes per annum (MTPA) at Taloja in Maharashtra, which would take the total ammonia capacity to 6,28,700 MTPA.
  • Thus, the increasing demand for ammonia is expected to drive the demand for syngas in the region during the forecast period.

China to Dominate the Asia-Pacific Market

  • In the Asia-Pacific region, China is the largest economy in terms of GDP. China is one of the fastest emerging economies and has become one of the biggest production houses in the world today. The country's manufacturing sector is one of the significant contributors to the country's economy.
  • In China, the demand for syngas is increasing from power generation, chemicals and fertilizers, liquid fuels, and gaseous fuel applications. Thus, various companies are increasing the production capacity of syngas in the country, thereby driving the market.
  • In China, Air Products was awarded a long-term onsite contract to supply syngas to Jiutai New Material Co. Ltd for its high-value mono-ethylene glycol project in Hohhot, China. The facility is designed to produce over 500,000 Nm3/hr of syngas, comprised of five gasifiers, two approximately 100,000 Nm3/hr air separation units (ASU) with syngas purification and processing, and associated infrastructure and utilities.
  • China is a significant producer and exporter of fertilizers, particularly ammonia-based fertilizers. The country is home to several significant chemical businesses that specialize in fertilizer manufacture, and its ammonia-based fertilizers are in high demand both domestically and internationally.
  • In the chemical industry, syngas is used to make chemicals and fuels. To make syngas, coal, petroleum coke, and biomass are turned into gas. In the chemical business, syngas is used to make methanol, ammonia, and hydrogen. Through the "gas-to-liquids" (GTL) process, carbon monoxide and hydrogen react to turn syngas into methanol. Methanol can be used to make formaldehyde, acetic acid, and other things.
  • Syngas is both a fuel and a raw material. It can be used to heat boilers and heat exchangers in chemical plants and for other high-temperature industrial uses. According to the BASF chemical outlook report, the chemical production capacity in China will increase by 7.7% in 2022 as compared to the growth rate of 6.6% during the previous year. Thus the growth in the chemical industry is expected to drive the demand for syngas in the country.
  • Increasing power generation in the country is boosting the demand for syngas. According to the China Electricity Council (CEC), in 2022, the power generation capacity in the country is registered at 2559.4 gigawatts, as compared to 2376.1 gigawatts of power generation capacity in the previous year. Thus, the increasing power generation capacity is expected to drive the demand for sungas in the country.
  • Thus, the growth in chemical, fertilizer, and power generation industries is expected to drive the market for syngas in the country.

Asia Pacific Syngas Industry Overview

The Asia-Pacific Syngas Market is fragmented in nature. Some of the major players in the market include (not in any particular order) include Air Products and Chemicals, Inc., Air Liquide, Haldor Topsoe A/S, Linde plc, and Sasol, among others.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support
Please note: The report will take approximately 2 business days to prepare and deliver.


1 INTRODUCTION
1.1 Study Assumptions
1.2 Scope of the Study
2 RESEARCH METHODOLOGY
3 EXECUTIVE SUMMARY
4 MARKET DYNAMICS
4.1 Drivers
4.1.1 Increasing Demand from Rising Sales of Electric Vehicles
4.1.2 Other Drivers
4.2 Restraints
4.2.1 Replacement of Rubber by Polyurethanes in Some Applications
4.2.2 Other Restraints
4.3 Industry Value Chain Analysis
4.4 Porter's Five Forces Analysis
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Consumers
4.4.3 Threat of New Entrants
4.4.4 Threat of Substitute Products and Services
4.4.5 Degree of Competition
5 MARKET SEGMENTATION (Market Size in Value)
5.1 Type
5.1.1 Styrene Butadiene Rubber (SBR)
5.1.2 Ethylene Propylenediene Rubber (EPDM)
5.1.3 Polyisoprene (IR)
5.1.4 Polybutadiene Rubber (BR)
5.1.5 Isobutylene Isoprene Rubber (IIR)
5.1.6 Other Types
5.2 Application
5.2.1 Tire and Tire Components
5.2.2 Non-tire Automobile Applications
5.2.3 Footwear
5.2.4 Industrial Goods
5.2.5 Other Applications
5.3 Geography
5.3.1 Asia-Pacific
5.3.1.1 China
5.3.1.2 India
5.3.1.3 Japan
5.3.1.4 South Korea
5.3.1.5 Malaysia
5.3.1.6 Thailand
5.3.1.7 Vietnam
5.3.1.8 Indonesia
5.3.1.9 Rest of Asia-Pacific
5.3.2 North America
5.3.2.1 United States
5.3.2.2 Canada
5.3.2.3 Mexico
5.3.3 Europe
5.3.3.1 Germany
5.3.3.2 United Kingdom
5.3.3.3 France
5.3.3.4 Italy
5.3.3.5 Spain
5.3.3.6 Russia
5.3.3.7 NORDIC
5.3.3.8 Turkey
5.3.3.9 Rest of Europe
5.3.4 South America
5.3.4.1 Brazil
5.3.4.2 Argentina
5.3.4.3 Colombia
5.3.4.4 Rest of South America
5.3.5 Middle-East and Africa
5.3.5.1 Saudi Arabia
5.3.5.2 South Africa
5.3.5.3 United Arab Emirates
5.3.5.4 Nigeria
5.3.5.5 Qatar
5.3.5.6 Egypt
5.3.5.7 Rest of Middle-East and Africa
6 COMPETITIVE LANDSCAPE
6.1 Mergers and Acquisitions, Joint Ventures, Collaborations, and Agreements
6.2 Market Share (%)**/Ranking Analysis
6.3 Strategies Adopted by Leading Players
6.4 Company Profiles
6.4.1 Apcotex
6.4.2 China Petrochemical Corporation
6.4.3 ENEOS Corporation
6.4.4 Exxon Mobil Corporation
6.4.5 Kumho Petrochemical
6.4.6 LANXESS
6.4.7 LG Chem
6.4.8 Mitsubishi Chemical Corporation
6.4.9 Reliance Industries Limited
6.4.10 SABIC
6.4.11 Saudi Arabian Oil Co.
6.4.12 SIBUR
6.4.13 Synthos
6.4.14 The Goodyear Tire & Rubber Company
6.4.15 TSRC
6.4.16 Versalis S.p.A.
6.4.17 Dow
7 MARKET OPPORTUNITIES AND FUTURE TRENDS
7.1 Development of Bio-based Feedstock for Synthetic Rubber
7.2 Other Opportunities

Download our eBook: How to Succeed Using Market Research

Learn how to effectively navigate the market research process to help guide your organization on the journey to success.

Download eBook
Cookie Settings