Concrete Repair Mortar Market Report: Trends, Forecast and Competitive Analysis to 2030

Concrete Repair Mortar Market Report: Trends, Forecast and Competitive Analysis to 2030


Concrete Repair Mortar Trends and Forecast

The future of the global concrete repair mortar market looks promising with opportunities in the buildings & car parks, road infrastructure, utility, and marine markets. The global concrete repair mortar market is expected to reach an estimated $5.2 billion by 2030 with a CAGR of 6.7% from 2024 to 2030. The major drivers for this market are the declining state of current residential infrastructure, heightened pressure on the strained infrastructure due to rising population, and rising demand for infrastructure repair.
  • Lucintel forecasts that, within the type category, PMC is expected to witness the highest growth over the forecast period due to lower cost, ease of use, and also use for both structural and non-structural repairs.
  • Within the end-use industry category, road infrastructure will remain the largest segment due to the high need for periodic maintenance of road infrastructure to prevent mishaps or accidents.
  • In terms of regions, APAC is expected to witness the highest growth over the forecast period due to the high growth of population, high construction growth, and aging infrastructure.
Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Concrete Repair Mortar Market

The concrete repair mortar market is evolving rapidly due to increasing infrastructure needs, technological advancements, and growing environmental concerns. Emerging trends are reshaping how repair mortars are formulated and applied, with a strong focus on durability, sustainability, and efficiency. These trends reflect the industry's response to the demands for longer-lasting repairs, reduced environmental impact, and adaptability to various conditions. Understanding these trends is crucial for stakeholders aiming to innovate and meet the evolving requirements of infrastructure maintenance and repair.
  • Enhanced Durability and Performance: The trend towards enhanced durability and performance in concrete repair mortars focuses on developing products that offer superior resistance to wear, environmental conditions, and mechanical stress. Innovations such as high-strength formulations, fiber-reinforced mortars, and advanced polymer technologies are being employed to improve the longevity and effectiveness of repairs. These enhancements address issues like cracking, surface degradation, and resistance to extreme weather, ensuring that repaired structures maintain their integrity over time. This trend is driven by the need for long-lasting repairs in both high-traffic and harsh environments, improving overall infrastructure resilience.
  • Eco-Friendly and Sustainable Solutions: There is a growing emphasis on eco-friendly and sustainable concrete repair mortars, driven by environmental regulations and green building standards. Trends include the use of recycled materials, low-VOC (volatile organic compounds) formulations, and products with reduced carbon footprints. Sustainable repair mortars aim to minimize environmental impact while maintaining high performance. Innovations such as bio-based additives and energy-efficient production processes contribute to this trend. As sustainability becomes increasingly important in construction, eco-friendly repair solutions help reduce the environmental impact of infrastructure maintenance and align with broader sustainability goals.
  • Fast-Setting and Quick-Curing Products: Fast-setting and quick-curing concrete repair mortars are gaining traction due to the need for efficient and timely repairs. These products are designed to set and cure rapidly, minimizing downtime and reducing disruption to daily operations. Innovations in chemical formulations and advanced curing technologies enable these mortars to achieve strength and durability in a shorter time frame. This trend is particularly relevant for high-traffic areas and critical infrastructure where prolonged repair times are undesirable. The ability to complete repairs quickly improves productivity and supports the continuous operation of commercial and industrial facilities.
  • Self-Healing Concrete Technologies: Self-healing concrete technologies are emerging as a significant trend in the repair mortar market. These advanced materials incorporate mechanisms that allow concrete to automatically repair minor cracks and damage over time. Innovations such as microcapsules containing healing agents or bacteria-based systems that precipitate calcium carbonate to seal cracks are gaining popularity. Self-healing technologies enhance the durability and longevity of concrete structures by reducing the need for frequent maintenance and repairs. This trend addresses the challenges of structural integrity and reduces long-term repair costs, contributing to more sustainable infrastructure solutions.
  • Smart and Interactive Repair Solutions: The integration of smart and interactive technologies into concrete repair mortars is a growing trend. These solutions include embedded sensors that monitor the condition of repaired surfaces, detect stress or damage, and provide real-time data for maintenance decisions. Innovations in sensor technology and data analytics enable proactive maintenance strategies and enhance the effectiveness of repairs. Smart repair mortars offer improved performance monitoring and early detection of potential issues, leading to more efficient management and extended lifespan of infrastructure. This trend represents a convergence of construction materials with digital technologies, improving repair processes and outcomes.
Emerging trends in the concrete repair mortar market are significantly enhancing the industry’s ability to address infrastructure challenges. Enhanced durability and performance, eco-friendly solutions, fast-setting products, self-healing technologies, and smart repair solutions are shaping the future of concrete repair. These trends reflect the industry's response to the need for more resilient, sustainable, and efficient repair options. By adopting these innovations, stakeholders can meet evolving requirements, improve infrastructure maintenance, and contribute to the development of more durable and environmentally conscious construction practices.

Recent Developments in the Concrete Repair Mortar Market

The concrete repair mortar market is experiencing significant advancements driven by innovations in technology, increasing demand for sustainability, and evolving infrastructure needs. These recent developments reflect the industry’s efforts to enhance the performance, efficiency, and environmental impact of repair solutions. As infrastructure projects continue to expand globally, the market is adapting to meet new challenges and expectations.
  • Advanced Polymer-Modified Mortars: Recent developments in polymer-modified mortars have led to improved adhesion, flexibility, and durability. These advanced mortars incorporate polymers that enhance the bond between the repair material and the existing concrete, reducing the likelihood of delamination and improving resistance to environmental factors such as moisture and temperature fluctuations. Innovations in polymer technology have resulted in mortars that set faster and cure more effectively, making them suitable for a wide range of repair applications, from structural reinforcements to aesthetic enhancements. This advancement addresses the growing need for high-performance repair solutions in demanding environments.
  • Eco-Friendly and Low-VOC Formulations: The push towards sustainability has led to the development of eco-friendly and low-VOC concrete repair mortars. These formulations are designed to minimize environmental impact by using recycled materials, reducing harmful emissions, and lowering the carbon footprint associated with repair processes. Low-VOC products improve indoor air quality and meet stringent environmental regulations, making them increasingly popular in green building projects. The adoption of eco-friendly repair solutions reflects a broader industry trend towards environmental responsibility and supports the growing demand for sustainable construction practices.
  • Rapid-Setting and Quick-Curing Technologies: Rapid-setting and quick-curing technologies are transforming the concrete repair mortar market by enabling faster completion of repair projects. Innovations in chemical additives and curing processes allow mortars to achieve strength and durability in significantly reduced time frames. This development is particularly beneficial for high-traffic areas and critical infrastructure where minimizing downtime is essential. Quick-curing products help accelerate project timelines, reduce labor costs, and minimize disruption to operations, making them a valuable asset for both commercial and industrial repair applications.
  • Self-Healing Concrete Mortars: Self-healing concrete mortars represent a groundbreaking development in repair technology. These mortars are designed to automatically repair minor cracks and damage through mechanisms such as embedded healing agents or bacteria that produce calcium carbonate to seal cracks. Self-healing technologies enhance the longevity and durability of repaired structures by reducing the need for frequent maintenance and extending the intervals between repairs. This innovation addresses the challenge of maintaining structural integrity over time and represents a significant advancement in creating more resilient and sustainable concrete solutions.
  • Integration of Smart Technologies: The integration of smart technologies into concrete repair mortars is an emerging trend, featuring embedded sensors that monitor the condition of repaired surfaces and provide real-time data. These smart repair solutions offer benefits such as early detection of stress or damage, improved performance monitoring, and data-driven maintenance strategies. By incorporating sensors and data analytics, these technologies enable proactive management of infrastructure and enhance the effectiveness of repairs. This development reflects a growing emphasis on leveraging digital tools to optimize repair processes and extend the lifespan of concrete structures.
Recent developments in the concrete repair mortar market are advancing the industry’s capabilities and addressing new challenges. From advanced polymer-modified and eco-friendly formulations to rapid-setting technologies, self-healing mortars, and smart solutions, these innovations are enhancing repair performance, sustainability, and efficiency. As infrastructure needs evolve, these key developments reflect a shift towards more durable, environmentally conscious, and technologically advanced repair solutions, positioning the market to better meet the demands of modern construction and maintenance projects.

Strategic Growth Opportunities for Concrete Repair Mortar Market

The concrete repair mortar market is poised for significant growth as infrastructure ages and demands for more durable and sustainable repair solutions increase. Strategic growth opportunities are emerging across various applications, driven by advancements in technology and evolving market needs. These opportunities reflect the potential for innovation and expansion in key sectors, including commercial, industrial, residential, infrastructure, and specialty applications. Leveraging these opportunities can help companies capture market share and address specific repair challenges effectively.
  • Commercial Building Repairs: The commercial building sector presents substantial growth opportunities for concrete repair mortars due to the increasing need for maintaining and upgrading office buildings, retail spaces, and public facilities. Advanced mortars with high durability, rapid curing, and aesthetic appeal are in demand to address wear and tear in high-traffic areas. The trend towards sustainability also drives the adoption of eco-friendly products in commercial renovations. Innovations that offer quick application and minimal disruption are particularly valuable, supporting efficient management and upkeep of commercial properties while enhancing their long-term performance and appearance.
  • Industrial Facility Maintenance: Industrial facilities, including manufacturing plants, warehouses, and processing units, require robust repair solutions due to the heavy wear and harsh conditions they face. Concrete repair mortars that offer high strength, chemical resistance, and thermal stability are crucial for maintaining these structures. Growth opportunities lie in developing specialized products that address specific challenges such as exposure to corrosive substances or extreme temperatures. Additionally, fast-setting and durable repair solutions help minimize downtime and ensure continued operational efficiency. As industrial infrastructure evolves, advanced mortars that can withstand demanding environments will be increasingly sought after.
  • Residential Infrastructure Upgrades: The residential market offers growth potential for concrete repair mortars as homeowners and property managers seek solutions for maintaining and upgrading residential infrastructure. Innovations in repair mortars that provide aesthetic versatility, ease of application, and long-lasting results cater to residential needs such as driveway repairs, basement waterproofing, and foundation crack repairs. Products that enhance the durability and appearance of residential surfaces are in demand, driven by trends in home improvement and renovation. The focus on user-friendly and cost-effective solutions provides opportunities for growth in the residential repair segment.
  • Infrastructure Rehabilitation: Infrastructure rehabilitation represents a significant growth opportunity for the concrete repair mortar market. Aging infrastructure, including bridges, highways, and tunnels, requires extensive repair and maintenance to ensure safety and functionality. Advanced repair mortars that offer high performance, longevity, and resistance to environmental stressors are essential for infrastructure projects. Technologies such as self-healing mortars and rapid-setting solutions are particularly valuable for minimizing disruption and extending the lifespan of critical infrastructure. As governments and organizations invest in infrastructure renewal, the demand for specialized repair solutions will continue to grow.
  • Specialty Applications: Specialty applications, including artistic concrete repairs, historical restorations, and unique structural challenges, present niche growth opportunities in the concrete repair mortar market. These applications require tailored solutions that address specific needs such as matching historical aesthetics, integrating with existing architectural features, or providing custom performance characteristics. Growth opportunities exist in developing specialized mortars that meet these unique requirements and offer innovative solutions for complex repair scenarios. As demand for bespoke repair solutions increases, companies that can provide high-quality, customized products will find opportunities in this specialized segment.
The growth rate of the concrete repair mortar industry exhibits high variability across geographies and application areas, with clear potential emerging in commercial, industrial, residential, infrastructure, and specialty applications. There are opportunities for such growth if stakeholders pay attention to improvements in strength, durability, sustainability, and intelligence in application. Specialized and creative strategies in repair will be instrumental in seizing opportunities in the market as the requirements for infrastructure expand and the difficulties in repair increase.

Concrete Repair Mortar Market Driver and Challenges

The concrete repair mortar market is influenced by a range of drivers and challenges that encompass technological advancements, economic conditions, and regulatory factors. Technological innovations push the market forward, while economic pressures and regulatory changes shape the landscape of product development and adoption. Understanding these drivers and challenges is crucial for stakeholders to navigate the market effectively and address the evolving needs of infrastructure maintenance and repair.

The factors responsible for driving the concrete repair mortar market include:
  • Technological Advancements: Technological innovations in concrete repair mortars are a key driver of market growth. Advances such as high-strength formulations, polymer modifications, and self-healing technologies enhance the performance and durability of repair solutions. Innovations in rapid-setting and quick-curing products also address the need for efficient repairs with minimal downtime. These advancements support more effective and long-lasting repairs, driving demand across various applications from commercial to infrastructure projects. The continuous evolution of repair technologies contributes to improved product performance and broader market adoption.
  • Growing Infrastructure Maintenance Needs: The increasing demand for infrastructure maintenance and rehabilitation drives the concrete repair mortar market. Aging infrastructure, such as bridges, highways, and buildings, requires ongoing repair and maintenance to ensure safety and functionality. As infrastructure ages, the need for effective and durable repair solutions grows, boosting demand for advanced concrete repair mortars. Additionally, urbanization and population growth contribute to infrastructure expansion and the associated need for repair and upkeep. This trend underscores the importance of reliable repair products in maintaining and extending the lifespan of critical infrastructure.
  • Sustainability and Environmental Regulations: The push towards sustainability and adherence to environmental regulations are significant drivers for the concrete repair mortar market. There is an increasing emphasis on eco-friendly products that reduce environmental impact, such as low-VOC formulations and mortars made from recycled materials. Regulatory standards aimed at minimizing carbon footprints and improving indoor air quality influence product development and market trends. Manufacturers are responding by developing repair mortars that meet stringent environmental criteria, aligning with green building practices, and supporting broader sustainability goals within the construction industry.
  • Demand for Rapid and Efficient Repairs: The need for rapid and efficient repairs is driving innovation in the concrete repair mortar market. Products that offer quick-setting and fast-curing capabilities are increasingly in demand to minimize downtime and disruptions, especially in high-traffic or critical infrastructure areas. The ability to perform repairs quickly and effectively enhances operational efficiency and reduces labor costs. This trend is particularly relevant for commercial and industrial applications where time-sensitive repairs are essential. The development of advanced mortars that meet these requirements supports market growth and addresses practical repair needs.
  • Increasing Investment in Infrastructure Projects: Rising investment in infrastructure projects is a significant driver for the concrete repair mortar market. Governments and private sector entities are investing in new construction and infrastructure upgrades, creating opportunities for repair solutions. Large-scale projects, including urban development, transportation networks, and public facilities, require ongoing maintenance and repair to ensure longevity. The influx of capital into infrastructure development boosts demand for high-performance repair mortars that can withstand the demands of these projects. This investment trend supports market growth and drives innovation in repair technologies.
Challenges in the concrete repair mortar market are:
  • High Cost of Advanced Materials: The high cost of advanced concrete repair mortars can be a challenge for market growth. Innovative products that offer superior performance, such as self-healing or polymer-modified mortars, often come with higher price tags. This can limit their adoption, particularly in cost-sensitive applications or regions with budget constraints. The challenge lies in balancing performance with affordability while meeting the demands for high-quality repair solutions. Manufacturers must address cost concerns to make advanced materials more accessible and competitive in the market.
  • Regulatory Compliance and Standards: Adhering to regulatory compliance and standards presents a challenge in the concrete repair mortar market. Different regions have varying regulations related to environmental impact, safety, and performance standards for construction materials. Navigating these regulatory requirements can be complex and costly for manufacturers. Ensuring that products meet local and international standards while maintaining competitive pricing requires significant investment in research and development, testing, and certification. Compliance with diverse regulations can impact market entry and product development strategies.
  • Competition and Market Saturation: Intense competition and market saturation pose challenges for the concrete repair mortar market. With numerous manufacturers and a wide range of products available, distinguishing one's offerings and maintaining market share can be difficult. The proliferation of similar products and innovations can lead to price pressures and reduced profit margins. Companies must continually innovate and differentiate their products to stay competitive. Strategic marketing, unique value propositions, and focus on emerging trends are essential for navigating a saturated market and achieving sustainable growth.
The concrete repair mortar market is always influenced by a combination of technological improvement, infrastructure needs, sustainability needs, and economic activities. However, other drivers, such as government political and monetary issues, need to be addressed to ensure the market continues to grow. Proper management of these factors will help stakeholders in the concrete repair sector adapt to changing market conditions and seize opportunities for growth and development in the sector.

List of Concrete Repair Mortar Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies concrete repair mortar companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the concrete repair mortar companies profiled in this report include-
  • Fosroc International
  • Ardex
  • Saint-Gobain Weber
  • Baumit
  • Sika
  • Normet
  • Bostik
Concrete Repair Mortar by Segment

The study includes a forecast for the global concrete repair mortar by type, application method, end use industry, and region.

Concrete Repair Mortar Market by Type [Analysis by Value from 2018 to 2030]:
  • PMC
  • Epoxy Method
Concrete Repair Mortar Market by Application Method [Analysis by Value from 2018 to 2030]:
  • Hand/Trawling
  • Spraying
  • Pouring
Concrete Repair Mortar Market by End Use Industry [Analysis by Value from 2018 to 2030]:
  • Buildings & Car Parks
  • Road Infrastructure
  • Utility
  • Marine
Concrete Repair Mortar Market by Region [Shipment Analysis by Value from 2018 to 2030]:
  • North America
  • Europe
  • Asia Pacific
  • The Rest of the World
Country Wise Outlook for the Concrete Repair Mortar Market

The concrete repair mortar market is evolving rapidly due to increasing infrastructure needs, technological advancements, and growing awareness of durability and sustainability in construction. Recent developments in this market reflect a response to challenges such as aging infrastructure, environmental concerns, and the demand for more efficient and effective repair solutions. As each country addresses these issues, distinct trends and innovations are emerging, shaping the market landscape. Here is an overview of recent developments in the concrete repair mortar market across the United States, China, Germany, India, and Japan.
  • United States: Recent developments in the U.S. concrete repair mortar market emphasize advanced formulations and sustainability. Innovations include the use of high-performance repair mortars that offer enhanced durability, rapid curing times, and improved adhesion. Eco-friendly products featuring recycled materials and low-VOC formulations are becoming more common, aligning with green building standards and regulations. Additionally, there is a growing focus on solutions that facilitate repairs in high-traffic areas and harsh weather conditions. The adoption of these advanced materials is driven by infrastructure renewal projects and the need for long-lasting repairs in both urban and rural settings.
  • China: In China, the concrete repair mortar market is expanding with a strong focus on large-scale infrastructure projects and urbanization. Recent advancements include the development of high-strength and quick-setting repair mortars designed to address the rapid pace of construction and maintenance required by China's growing cities and industrial areas. There is also an emphasis on incorporating nanotechnology and polymer modifications to enhance the performance of repair mortars. Additionally, the market is seeing increased investment in research and development to produce more cost-effective and high-quality repair solutions that meet the demands of extensive infrastructure and construction activities.
  • Germany: The German concrete repair mortar market is characterized by a push towards innovation and sustainability. Recent developments include the introduction of advanced mortars with improved crack resistance, durability, and environmental performance. The use of bio-based and low-emission products is gaining traction as part of Germany's commitment to green building practices and reducing carbon footprints. Furthermore, there is a focus on repair solutions that integrate seamlessly with existing infrastructure, offering long-term performance and aesthetic consistency. The emphasis on quality and environmental considerations reflects Germany's rigorous standards and its role as a leader in sustainable construction practices.
  • India: In India, the concrete repair mortar market is experiencing growth driven by rapid urbanization and infrastructure development. Recent developments include the introduction of cost-effective and high-performance repair mortars that address the challenges of extreme weather conditions and diverse environmental factors. Advances such as polymer-modified mortars and self-healing concretes are gaining popularity for their ability to enhance durability and reduce maintenance needs. The market is also seeing increased availability of ready-mix repair mortars, which streamline application processes and improve repair efficiency. These innovations support India's ambitious infrastructure projects and the ongoing need for robust repair solutions.
  • Japan: The Japan concrete repair mortar market is evolving with a focus on seismic resilience and durability. Recent developments include the introduction of advanced repair mortars that offer enhanced flexibility and resistance to earthquake-related stress. Innovations such as high-strength, fiber-reinforced mortars and those incorporating advanced curing technologies are addressing Japan's specific seismic and environmental conditions. Additionally, there is a growing emphasis on eco-friendly products that align with Japan's environmental regulations and sustainability goals. The market reflects Japan's commitment to maintaining and improving infrastructure resilience in the face of natural disasters and changing environmental conditions.
Features of the Global Concrete Repair Mortar Market

Market Size Estimates: Concrete repair mortar market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: Concrete repair mortar market size by type, application method, end use industry, and region in terms of value ($B).

Regional Analysis: Concrete repair mortar market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different type, application method, end use industry, and regions for the concrete repair mortar market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the concrete repair mortar market.

Analysis of competitive intensity of the industry based on Porter’s Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

Q.1. What are some of the most promising, high-growth opportunities for the concrete repair mortar market by type (pmc and epoxy method), application method (hand/trawling, spraying, and pouring), end use industry (buildings & car parks, road infrastructure, utility, and marine), and region (North America, Europe, Asia Pacific, and the Rest of the World)?

Q.2. Which segments will grow at a faster pace and why?

Q.3. Which region will grow at a faster pace and why?

Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?

Q.5. What are the business risks and competitive threats in this market?

Q.6. What are the emerging trends in this market and the reasons behind them?

Q.7. What are some of the changing demands of customers in the market?

Q.8. What are the new developments in the market? Which companies are leading these developments?

Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?

Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?

Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?


1. Executive Summary
2. Global Concrete Repair Mortar Market : Market Dynamics
2.1: Introduction, Background, and Classifications
2.2: Supply Chain
2.3: Industry Drivers and Challenges
3. Market Trends and Forecast Analysis from 2018 to 2030
3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
3.2. Global Concrete Repair Mortar Market Trends (2018-2023) and Forecast (2024-2030)
3.3: Global Concrete Repair Mortar Market by Type
3.3.1: PMC
3.3.2: Epoxy Method
3.4: Global Concrete Repair Mortar Market by Application Method
3.4.1: Hand/Trawling
3.4.2: Spraying
3.4.3: Pouring
3.5: Global Concrete Repair Mortar Market by End Use Industry
3.5.1: Buildings & Car parks
3.5.2: Road Infrastructure
3.5.3: Utility
3.5.4: Marine
3.6: Global Concrete Repair Mortar Market by Grade
3.6.1: Structural
3.6.2: Non Structural
4. Market Trends and Forecast Analysis by Region from 2018 to 2030
4.1: Global Concrete Repair Mortar Market by Region
4.2: North American Concrete Repair Mortar Market
4.2.1: North American Market by End Use Industry: Buildings & Car parks, Road Infrastructure, Utility, and Marine
4.3: European Concrete Repair Mortar Market
4.3.1: European Market by Type: PMC and Epoxy Method
4.3.2: European Market by End Use Industry: Buildings & Car parks, Road Infrastructure, Utility, and Marine
4.4: APAC Concrete Repair Mortar Market
4.4.1: APAC Market by Type: PMC and Epoxy Method
4.4.2: APAC Market by End Use Industry: Buildings & Car parks, Road Infrastructure, Utility, and Marine
4.5: ROW Concrete Repair Mortar Market
4.5.1: ROW Market by Type: PMC and Epoxy Method
4.5.2: ROW Market by End Use Industry: Buildings & Car parks, Road Infrastructure, Utility, and Marine
5. Competitor Analysis
5.1: Product Portfolio Analysis
5.2: Operational Integration
5.3: Porter’s Five Forces Analysis
6. Growth Opportunities and Strategic Analysis
6.1: Growth Opportunity Analysis
6.1.1: Growth Opportunities for the Global Concrete Repair Mortar Market by Type
6.1.2: Growth Opportunities for the Global Concrete Repair Mortar Market by Application Method
6.1.3: Growth Opportunities for the Global Concrete Repair Mortar Market by End Use Industry
6.1.4: Growth Opportunities for the Global Concrete Repair Mortar Market by Grade
6.1.5: Growth Opportunities for the Global Concrete Repair Mortar Market by Region
6.2: Emerging Trends in the Global Concrete Repair Mortar Market
6.3: Strategic Analysis
6.3.1: New Product Development
6.3.2: Capacity Expansion of the Global Concrete Repair Mortar Market
6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Concrete Repair Mortar Market
6.3.4: Certification and Licensing
7. Company Profiles of Leading Players
7.1: Fosroc International
7.2: Ardex
7.3: Saint-Gobain Weber
7.4: Baumit
7.5: Sika
7.6: Normet
7.7: Bostik

Download our eBook: How to Succeed Using Market Research

Learn how to effectively navigate the market research process to help guide your organization on the journey to success.

Download eBook
Cookie Settings