Resins Market Research Reports & Industry Analysis
Resin as a synthetic compound begins in a highly sticky, thick state and hardens with treatment. Generally, resin is soluble in alcohol. There are different classes of resin, dependent upon exact chemical composition and potential uses. There are many uses for resins, ranging from art to polymer production.
A classic example of resin is pine sap, which has the characteristic sharp odor of terpene compounds. Some plants produce a similar substance called gum or gum resin which is soluble with water. Gum tends to be softer and more malleable than resin.
It has also been used as a component in lacquer, jewelry, inks, perfumes, varnish, and many other products. Technological advances realized the formulation of resins into polymers, and the discovery of synthetic resins followed shortly after.
Polymers are made with synthetic resin, which is cheaper and easier to refine. Synthetic resin is more stable, predictable, and uniform than natural resin as it is made under controlled conditions preventing impurities. These resins are made by combining chemicals to stimulate a reaction which results in the formulation of a resinous compound. Synthetic resin can be used in the production of plastics, paints, and many of the same substances that natural resin is used in.
Resins Industry Research & Market Reports
-
2022 Global: Coating Resins - Innovative Markets Forecast (2028) report
... 2028. Perry/Hope Partners' reports provide the most accurate industry forecasts based on our proprietary economic models. Our forecasts project the product market size nationally and by regions for 2017 to 2028 using regression analysis in ... Read More
-
2022 Global Forecast for Hybrid Composites (2023-2028 Outlook)-High Tech & Emerging Markets Report
... global market is expected to increase from USD xx billion in 2022 to USD xx billion by 2028, at a CAGR of xx% from 2023 to 2028. Estimates on equipment or material sales (product shipments ... Read More
-
Dental Liners and Bases Market by Material (Zinc Oxide Eugenol, Glass Ionomer, Resin-modified Glass Ionomers, and Others) and End User (Hospitals, Dental Clinics, and Research & Academic Institutes): Global Opportunity Analysis and Industry Forecast, 2021–2030
... The global dental liners and bases market was valued at $1,322.64 million in 2020, and is estimated to reach $1,995.14 million by 2030, growing at a CAGR of 4.1% from 2021 to 2030. Dental liners ... Read More
-
2022 Global Forecast for Extruded Polypropylene (Xpp) Foam (2023-2028 Outlook)-High Tech & Emerging Markets Report
... countries. The global market is expected to increase from USD xx billion in 2022 to USD xx billion by 2028, at a CAGR of xx% from 2023 to 2028. Estimates on equipment or material sales ... Read More
-
Saudi Arabia Disposable Mask Market; By Product (Non-woven Masks, Dust Masks, Protective Masks, Surgical Masks, Others); By Material (Polypropylene, Melt Brown, Nylon, Cotton, Others); By End-Use (Personal/Individual, Commercial, Industrial); By Distribution Channel (Online, Offline); Trend Analysis, Competitive Market Share & Forecast, 2018-2028
... Analysis, Competitive Market Share & Forecast, 2018-2028 Saudi Arabia Disposable Mask Market Witnessing Sturdy Growth — Projected to Grow at a CAGR of 17.5% During 2022-2028 Saudi Arabia disposable mask market is set to witness ... Read More
-
Global Oleoresin Market Report and Forecast 2022-2027
... 2021. Aided by the escalating health consciousness, the market is projected to further grow at a CAGR of 4.5% between 2022 and 2027 to reach a value of USD 2356.2 million by 2027. Oleoresins are ... Read More
-
Low VOC Adhesive Market - Global Outlook & Forecast 2022-2027
... expected to grow at a CAGR of 6.19% during the forecast period Increasing the adoption of low VOC adhesives in emerging economies such as China, India, and Brazil in their numerous industries boosts the market ... Read More
-
Solid-grade Thermoplastic Acrylic (Beads) Resin Market - Growth, Trends, COVID-19 Impact, and Forecasts (2021 - 2026)
... to grow with a CAGR of over 5%, in terms of revenue, during the forecast period (2022-2027). The market is negatively impacted by COVID-19 in 2020. Considering the pandemic scenario, various construction activities were on ... Read More
-
The Global Market for Composites: Resins, Fillers, Reinforcements, Natural Fibers and Nanocomposites Through 2026
... market for composites is analyzed by dividing it based on five major types and subtypes. The report also gives revenue forecasts from 2021 to 2026 for each of these major types of composites, for their ... Read More
-
Unidirectional Tapes (UD) Market by Fiber (Glass, Carbon), Resin (Thermoplastic, Thermoset), End-use Industry (Aerospace & Defense, Automotive, Sports & Leisure) and Region (North America, Europe, Asia Pacific) - Global Forecasts to 2026
... market is projected to grow from USD 194 million in 2021 to USD 332 million by 2026, at a CAGR of 11.4%, between 2021 and 2026. The UD tapes market depends heavily on the performance ... Read More
-
Sports Composites Market by Resin Type (Epoxy, Polyamide, Polyurethane, Polypropylene) Fiber Type (Carbon, Glass), Application (Golf Sticks, Hockey Sticks, Rackets, Bicycles, Skis & Snowboards) and Region Global Forecast to 2026
... size is projected to grow from USD 4.1 billion in 2021 to USD 5.1 billion by 2026, at a CAGR of 4.8% between 2021 and 2026. Carbon fibers are fibers about 5–10 micrometres in diameter ... Read More
-
Micro Injection Molded Plastic Market by Material Type (Liquid-Crystal Polymer (LCP), Polyether Ether Ketone (PEEK), Polycarbonate (PC), Polyethylene (PE), Polyoxymethylene (POM)), Application and Region - Global Forecast to 2026
... is projected to reach USD 609 million by 2026, at a CAGR of 9.8% from USD 381 million in 2021. The major drivers of this market are growth in automotive sector and rising demand from ... Read More
-
PVDF Resin Market by Type of Crystalline Phase (Alpha, Beta, Gamma, and Delta), Application (Pipes and Fittings, Films and Sheets, Coatings, Membranes, Wire and Cable, Li-ion Batteries and Others), and End-user Industry (Chemical Processing, Electrical & Electronics, Building and Construction, Oil & Gas, Automotive and Others): Global Opportunity Analysis and Industry Forecast, 2021–2030
... & Electronics, Building and Construction, Oil & Gas, Automotive and Others): Global Opportunity Analysis and Industry Forecast, 2021–2030 The PVDF resin market size was valued at $1.0 billion in 2020, and is projected to reach ... Read More
-
Paints & Coatings Market by Resin (Acrylic, Alkyd, Epoxy, PU, Vinyl, Fluoropolymer, Polyester), Technology (Waterborne, Solventborne, Powder), Application (Architectural (Residential, Non-residential), Industrial) and Region - Global Forecast to 2026
... projected to grow from USD 184 Billion in 2021 to USD 212 Billion by 2026, at a CAGR of 2.9% between 2021 and 2026. The key factor driving the growth of the market is increasing ... Read More
-
Epoxy Resin Market in South America 2022-2026
... 4.05% during the forecast period. Our report on the epoxy resin market in South America provides a holistic analysis, market size and forecast, trends, growth drivers, and challenges, as well as vendor analysis covering around ... Read More
-
Market Study on Dimer Fatty Acid: Standard Variants Account for Over 60% Market Share
... market. The report provides detailed valuation on key market dynamics, such as the drivers, trends, opportunities, and restraints, along with detailed information about the market structure. This research report presents exclusive facts and figures about ... Read More
-
Plastic Foams: United States
... foams such as high-density polyethylene (HDPE), polypropylene, and vinyl. Total demand is also segmented by market as follows: packaging; construction; appliances and furniture; motor vehicles; and other markets (such as industrial; heating, ventilation, and air ... Read More
-
Global and China PVB Emulsion Market Status and Forecast 2021-2028
... PVB Emulsion market size was US$ 19 million and it is expected to reach US$ 23.42 million by the end of 2028, with a CAGR of 3.36% during 2021-2028. In China, the PVB Emulsion market ... Read More
-
India Distemper Market, By Type (Oil Based Distemper, Dry Distemper), By Method of Application (Paint Brush, Roller, Spray), By Application (Exterior Walls, Interior Walls), By Resin Type (Acrylic, Synthetic, and UNO Acrylic), By Color (White, Blue, Yellow, Green, Pink, Others), By Painting (Re-Painting, Fresh Painting), By Region, Competition Forecast & Opportunities, 2017-2027
... Blue, Yellow, Green, Pink, Others), By Painting (Re-Painting, Fresh Painting), By Region, Competition Forecast & Opportunities, 2017-2027 India Distemper Market valued at USD627.9 million (INR 4714.50 crore) in 2021 and is anticipated to project a ... Read More
-
Consumer Foam Market by Foam Type, Resin Type (Polyurethane, Polystyrene, Polyolefins, Phenolic), End-use Industry(Bedding & Furniture, Footwear, Automotive), & Region (APAC, North America, South America, Europe, MEA) - Global Forecast to 2026
... market is projected to grow from USD 40.2 billion in 2021 to USD 50.9 billion by 2026, at a CAGR of 4.9% from 2021 to 2026. One of the key factors driving the growth of ... Read More
-
Ink Resin Market by Resin Type (Modified Rosins, Hydrocarbon, Modified Cellulose), by Technology (Oil, Solvent, Water, UV-curable), by Application (Printing & Publication, Flexible Packaging, Corrugated Cardboards & Cartons) - Global Forecast to 2026
... resins market is estimated to be USD 3.3 billion in 2021 and is projected to reach USD 3.8 billion by 2026, at a CAGR of 3.4%. Increasing environmental protection standards for the printing ink industry, ... Read More
-
Industrial Foam Market by Foam Type (Flexible, Rigid), Resin Type (Polyurethane, Polystyrene, Polyolefins, Phenolic, Pet), End-Use Industry and Region (North America, APAC, Europe, MEA, South America) - Global Forecast to 2026
... size is estimated at USD 55.6 billion in 2021 and is projected to reach USD 72.2 billion by 2026, at a CAGR of 5.4% between 2021 and 2026. The market is propelled by the growth ... Read More
-
Composite Resin Market by Resin Type (Thermoset, Thermoplastic), Manufacturing Process (Layup, Filament Winding, Injection Molding, Pultrusion, Compression Molding, Resin Transfer Molding), Application and Region - Global Forecast to 2026
... to grow from USD 20.5 billion in 2021 to USD 27.4 billion by 2026, at a CAGR of 6.0% during the forecast period. Increasing demand from various end-use applications is majorly driving the growth of ... Read More
-
Resins in Paints and Coatings Market - Growth, Trends, COVID-19 Impact, and Forecasts (2021 - 2026)
... expected to witness a CAGR of more than 4.5% during the forecast period (2022-2027). The outbreak of COVID-19 brought several short-term and long-term consequences in the construction industry, which may affect the paints and coatings ... Read More
-
Thermoplastic Polyolefin (TPO) Market by Type (In-situ TPO, Compounded TPO, & POEs), Application (Automotive, Building & Construction, Medical, Wire & Cables), and Region (APAC, North America, Europe, MEA, South America) - Global Forecast to 2026
... The global thermoplastic polyolefin (TPO) market size is estimated to be USD 4.5 billion in 2021 and is projected to reach USD 6.2 billion by 2026, at a CAGR of 6.4% between 2021 and 2026. ... Read More
Research Assistance
