Resins Market Research Reports & Industry Analysis
Resin as a synthetic compound begins in a highly sticky, thick state and hardens with treatment. Generally, resin is soluble in alcohol. There are different classes of resin, dependent upon exact chemical composition and potential uses. There are many uses for resins, ranging from art to polymer production.
A classic example of resin is pine sap, which has the characteristic sharp odor of terpene compounds. Some plants produce a similar substance called gum or gum resin which is soluble with water. Gum tends to be softer and more malleable than resin.
It has also been used as a component in lacquer, jewelry, inks, perfumes, varnish, and many other products. Technological advances realized the formulation of resins into polymers, and the discovery of synthetic resins followed shortly after.
Polymers are made with synthetic resin, which is cheaper and easier to refine. Synthetic resin is more stable, predictable, and uniform than natural resin as it is made under controlled conditions preventing impurities. These resins are made by combining chemicals to stimulate a reaction which results in the formulation of a resinous compound. Synthetic resin can be used in the production of plastics, paints, and many of the same substances that natural resin is used in.
Resins Industry Research & Market Reports
-
Biohazard Bags Market By Capacity (Less than 15 gallons, 15-30 gallons, More than 30 gallons), By Material Type (Polypropylene, Polyethylene, Plastic, High-Density Polyethylene, Others), By End-use (Hospitals, Clinics, & Diagnostic Lab, Home & Ambulatory Care, Pharmaceutical & Biopharmaceutical Industries): Global Opportunity Analysis and Industry Forecast, 2021-2031
... Pharmaceutical & Biopharmaceutical Industries): Global Opportunity Analysis and Industry Forecast, 2021-2031 The global biohazard bags market is envisioned to garner $679.1 million by 2030, growing from $396.6 million in 2021 at a CAGR of 6.38% ... Read More
-
Thermally Conductive Plastics Market by Type (Polyamide, PBT, Polycarbonate, PPS, PEI, Polysulfones), End-use (Electrical & Electronics, Automotive, Industrial, Aerospace, Healthcare, Telecommunications) and Region - Global Forecast to 2027
... is projected to grow from USD 121 million in 2021 to reach USD 298 million by 2027, at a CAGR of 16.2% between 2022 and 2027. Rising demand for heat dissipation materials in LED lightings, ... Read More
-
Global Polyurethane Microspheres Market 2022-2026
... Our report on the polyurethane microspheres market provides a holistic analysis, market size and forecast, trends, growth drivers, and challenges, as well as vendor analysis covering around 25 vendors. The report offers an up-to-date analysis ... Read More
-
Ion Exchange Resins Market, by Product Type (Cation Exchange Resins, Anion Exchange Resins, Others), by Application (Power Generation, Chemical & Fertilizers, Food & Beverages, Electrical & Electronics, Pharmaceuticals, Paper & Pulp, Domestic & Wastewater Treatment, Others), and by Region (North America, Europe, Asia Pacific, Latin America, and Middle East & Africa)- Size, Share, Outlook, and Opportunity Analysis, 2022 - 2030
... Others), and by Region (North America, Europe, Asia Pacific, Latin America, and Middle East & Africa)- Size, Share, Outlook, and Opportunity Analysis, 2022 - 2030 Ion exchange resins are extensively used in water treatment plants ... Read More
-
EVOH Resins Market for Food Application Forecast to 2028 - COVID-19 Impact and Global Analysis By Application (Films, Tray, Bottles, Bag-in-box, and Others) and End-Use (Bakery and Confectionery, Beverages, Sauces and Dressings, Meat Poultry and Seafood, RTE Foods and Meals, and Others)
... Seafood, RTE Foods and Meals, and Others) The EVOH resins market for food application was valued at US$ 576173.9 million in 2021 and is projected to reach US$ 770199.9 million by 2028. It is expected ... Read More
-
Electronic Adhesives Market by Form (Liquid, Paste, Solid), Resin (Epoxy, Silicone, Acrylic), End-Use Industry (Communications, Computers, Consumer Electronics, Industrial, Medical), Product Type and Region - Global Forecast to 2027
... to grow from USD 4.5 billion in 2022 to USD 6.1 billion by 2027, at a CAGR of 6.1% between 2022 and 2027. The global electronic adhesives market is driven by the rising demand for ... Read More
-
Plastics for Barrier Packaging
... primarily a study of U.S. markets. However, because of the increasingly global nature of polymer and packaging chemistry, it touches on some noteworthy international activities, primarily those having an impact on the U.S. market, such ... Read More
-
Ball Clay Market, By Application: Ceramic Applications (Sanitary Ware, Wall and Floor Tiles, Tableware, Refractories, Other Ceramic Applications), Non-Ceramic Applications (Adhesives and Sealants, Rubbers and Plastics, Fertilizers and Insecticides), By Region (North America, Latin America, Europe, Asia Pacific, Middle East, Africa) - Size, Share, Outlook, and Opportunity Analysis, 2022 - 2030
... Europe, Asia Pacific, Middle East, Africa) - Size, Share, Outlook, and Opportunity Analysis, 2022 - 2030 This sedimentary clay commonly contains 20 to 80% kaolinite, 10 to 25% mica, and six to 65 percent quartz. ... Read More
-
Medical Tubing Market, by Material (Polyvinyl Chloride (PVC)), Thermoplastic Elastomer (TPE), Thermoplastic Polyurethane (TPU), Silicone, Polyolefins (Polyethylene (PE), and Polypropylene (PP)), and Others), by Application (Peristaltic Pump Tubing, Catheters (Diagnostic Catheters, Central Venous Catheters, Angioplasty Catheters, and Other Catheters), Feeding Tubes, Urological Retrieval Devices, Cannulas, and Other Applications), and by Region (North America, Latin America, Europe, Asia Pacific, Middle East, and Africa)- Size, Share, Outlook, and Opportunity Analysis, 2022 - 2030
... Catheters, and Other Catheters), Feeding Tubes, Urological Retrieval Devices, Cannulas, and Other Applications), and by Region (North America, Latin America, Europe, Asia Pacific, Middle East, and Africa)- Size, Share, Outlook, and Opportunity Analysis, 2022 - ... Read More
-
Flexographic Printing Inks Market (Type: Water-basne, Acryed, Solvent-based, and UV-cured; Resin: Nitrocellulose, Polyamide, Polyurethalic, and Others) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast, 2022-2031
... TMR’s report on the global venous diseases treatment market studies the past as well as the current growth trends and opportunities to gain valuable insights of the indicators of the market during the forecast period ... Read More
-
Urea Formaldehyde Market Analysis and Forecast to 2031: By Application (Particle Boards, Wood Adhesives, Plywood, Others), End Use (Automotive, Agriculture, Building & Construction, Others), and Region
... used as an adhesive and as a surface coating. It is made by combining urea and formaldehyde. UF is a thermosetting plastic, which means that it sets (hardens) when it is heated. It is a ... Read More
-
Bio-based Coatings Market by Resin (Alkyd, Polyurethane, Acrylic), Application (Architectural, Transportation, Woodworking, Packaging), Region (Asia Pacific, North America, Europe, South America, Middle East & Africa) - Global Forecast to 2027
... projected to grow from USD 11.5 billion in 2022 to USD 18.2 billion by 2027, at a CAGR of 9.5% between 2022 and 2027. The restraints related to the use of bio-based coatings market is ... Read More
-
Expanded Polypropylene (EPP) Foam Market - Growth, Trends, COVID-19 Impact, and Forecasts (2022 - 2027)
... The market was negatively impacted due to the COVID-19 pandemic in 2020. However, the condition recovered in 2021, and it is expected to observe a stable growth trajectory over the forecast period. Over the medium ... Read More
-
Engineering Plastics Market by Type (Polycarbonate, Polyamide, ABS, PET & PBT, POM, Fluoropolymer), End-use Industry (Automotive & Transport, Electrical & Electronics, Industrial & Machinery, Packaging) and Region - Global Forecast to 2027
... plastics market size is projected to grow from USD 107.2 billion in 2022 to USD 140.9 billion by 2027, at a CAGR of 5.6% from 2022 to 2027. The growth because of conventional materials not ... Read More
-
Global Polybutadiene Market Report and Forecast 2022-2027
... 2021. Aided by the increased demand for high-performance tyres across the automobile industry, the market is projected to further grow at a CAGR of 4.1% between 2022 and 2027 to reach a value of USD ... Read More
-
Global Melamine Pyrophosphate Market Size study, By Type (Experimental Grade Melamine Pyrophosphate, Industrial Grade Melamine Pyrophosphate, Commercial Grade Melamine Pyrophosphate), By Application (Synthetic Resins, Thermoplastic Elastomers, Others), By End Use Industry (Synthetic Resins, Automotive, Textile, Aerospace & Defense, Packaging, Others), and Regional Forecasts 2022-2028
... Aerospace & Defense, Packaging, Others), and Regional Forecasts 2022-2028 Global Melamine Pyrophosphate Market is valued approximately USD XX million in 2021 and is anticipated to grow with a healthy growth rate of more than XX ... Read More
-
Automotive 3D Printing Market by Vehicle Type (ICE & Electric Vehicles), Offering (Hardware & Software), Component, Material (Metals, Plastics, Resin & Composites), Technology (SLA, SLS, EBM, FDM, LOM, 3DIP), Application, & Region - Global Forecast to 2027
... to 2027 The automotive 3D printing market is projected to grow from USD 2.9 billion in 2022 to USD 7.9 billion by 2027, at a CAGR of 21.7%. The increase in demand to reduce vehicle ... Read More
-
Global Industrial Flooring Market Size study, by Resin Type (Epoxy, Polyaspartic, Polyurethane, Acrylic, Other Resin Types), by Application (Concrete, Wood, Other Applications), by End-user Industry (Food and Beverage, Chemical, Transportation and Aviation, Healthcare, Other end-user industries) and Regional Forecasts 2022-2028
... industries) and Regional Forecasts 2022-2028 Global Industrial Flooring Market is valued at approximately USD 7.9 billion in 2021 and is anticipated to grow with a healthy growth rate of more than 5.4 % over the ... Read More
-
Propylene Market, by Derivative (Polypropylene, Propylene oxide, Cumene, Acrylonitrile, Alcohols, Acrylates, and Others), by End-use Industry (Automotive, Construction, Textiles, Packaging, and Others), and by Region (North America, Latin America, Asia Pacific, Europe, and Middle East & Africa) - Size, Share, Outlook, and Opportunity Analysis, 2022 - 2030
... & Africa) - Size, Share, Outlook, and Opportunity Analysis, 2022 - 2030 Propylene is used in various end-use industries such as automotive, construction, textile, packaging, and others. Propylene is considered as one of the key ... Read More
-
Polyurethane Market Global Briefing 2022
... strategists, marketers and senior management with the critical information they need to assess the global polyurethane sector. Reasons to Purchase Fully updated for 2022 Identify growth segments and opportunities. Facilitate decision making on the basis ... Read More
-
Polystyrene-Plastic Material And Resins Market Global Briefing 2022
... Polystyrene-Plastic Material And Resins Market Global Briefing 2022 provides strategists, marketers and senior management with the critical information they need to assess the global polystyrene-plastic material and resins sector. Reasons to Purchase Fully updated for ... Read More
-
Silicone (except Resins) Market Global Briefing 2022
... Resins) Market Global Briefing 2022 provides strategists, marketers and senior management with the critical information they need to assess the global silicone (except resins) sector. Reasons to Purchase Fully updated for 2022 Identify growth segments ... Read More
-
Epoxy Coating Market Forecasts to 2028 – Global Analysis By Substrate (Wood, Metal, Concrete), Product (Waterborne, Powder), Application, End User, and By Geography
... $33.77 billion in 2021 and is expected to reach $64.97 billion by 2028 growing at a CAGR of 9.8% during the forecast period. Epoxy coatings are durable coatings, formed by mixing epoxide resin and polyamine ... Read More
-
Seamless Pipes Market Forecasts to 2028 – Global Analysis By Material (Steel & Alloys, Nickel & Alloys), Production Process (Multi-Stand Plug Mill, Cross-Roll Piercing & Pilger Rolling), Resin Type (Vinyl Adhesive, Polyurethane Adhesive) and By Geography
... Geography According to Stratistics MRC, the Global Seamless Pipes Market is accounted for $250.57 billion in 2022 and is expected to reach $380.28 billion by 2028 growing at a CAGR of 7.2% during the forecast ... Read More
-
Hexamethylenediamine Market by Application (Nylon Synthesis, Curing Agents, Lubricants, Biocides, Coatings Intermediate, Adhesives), End-Use Industry (Automotive, Textile, Paints & Coatings, Petrochemical) and Region - Global Forecast to 2027
... to grow from USD 8.9 billion in 2022 to USD 11.6 billion by 2027, at a CAGR of 5.4% from 2022 to 2027. The market will experience a growth of 5.4% with respect to CAGR ... Read More
Research Assistance
