Resins Market Research Reports & Industry Analysis
Resin as a synthetic compound begins in a highly sticky, thick state and hardens with treatment. Generally, resin is soluble in alcohol. There are different classes of resin, dependent upon exact chemical composition and potential uses. There are many uses for resins, ranging from art to polymer production.
A classic example of resin is pine sap, which has the characteristic sharp odor of terpene compounds. Some plants produce a similar substance called gum or gum resin which is soluble with water. Gum tends to be softer and more malleable than resin.
It has also been used as a component in lacquer, jewelry, inks, perfumes, varnish, and many other products. Technological advances realized the formulation of resins into polymers, and the discovery of synthetic resins followed shortly after.
Polymers are made with synthetic resin, which is cheaper and easier to refine. Synthetic resin is more stable, predictable, and uniform than natural resin as it is made under controlled conditions preventing impurities. These resins are made by combining chemicals to stimulate a reaction which results in the formulation of a resinous compound. Synthetic resin can be used in the production of plastics, paints, and many of the same substances that natural resin is used in.
Resins Industry Research & Market Reports
-
Low Temperature Powder Coatings Market Share, Size, Trends, Industry Analysis Report, By Resin (Hybrid, Polyester, Epoxy, and Others); By Substrate; By End-Use; By Region; Segment Forecast, 2023-2032
... is expected to reach USD 135.63 million by 2032, according to a new study by Polaris Market Research. The report “Low Temperature Powder Coatings Market Share, Size, Trends, Industry Analysis Report, By Resin (Hybrid, Polyester, ... Read More
-
Engineering Plastics Market Share, Size, Trends, Industry Analysis Report, By Type (Polyamide, Acrylonitrile Butadiene Styrene, Polycarbonate, Thermoplastic Polyester, Polyacetal, Fluoropolymer, and Others); By End-Use Industries; By Region; Segment Forecast, 2022 - 2030
... plastics market size is expected to reach USD 193.24 billion by 2030, according to a new study by Polaris Market Research. The report “Engineering Plastics Market Share, Size, Trends, Industry Analysis Report, By Type (Polyamide, ... Read More
-
Global Phenolic Resin Market Size, Trends And Growth Opportunity, By Application (Adhesives, Molding, Insulation, Laminates, Coatings, Rubber And Tire, Abrasives, Electronics, Refractory Material, Friction Material),By Product(Novolac, Resols ),By End Use (Building And Construction, Automotive, Electrical And Electronics, Furniture And Others).By Region And Forecast 2027.
... And Electronics, Furniture And Others).By Region And Forecast 2027. Phenolic Resin Market The Global Phenolic Resin Market size was valued at USD 11.7 billion in 2021 and it is expected to reach at a value ... Read More
-
Global Methacrylonitrile Market Research Report 2022
... 2028. The major global manufacturers of Methacrylonitrile include Asahi Kasei, Hunan Daochen Technology Co., Ltd., Hunan Huateng Pharmaceutical Co., Ltd. and Qingdao Sichen Bio Co., Ltd., etc. In 2021, the world's top three vendors accounted ... Read More
-
UV Adhesives Market Size By Product (Silicon, Acrylic, Polyurethane, Epoxy, Others), By End-User (Medical, Electronics, Automotive, Cosmetics, Industrial Assembly, Others) Industry Analysis Report, Regional Outlook, Growth Potential, Price Trends, Competitive Landscape & Forecast, 2023 - 2032
... 2032 UV Adhesives Market is expected to register steady growth by 2032, accredited majorly to the expansion of the medical industry in North America, especially the United States. The product is used in bonding, coating, ... Read More
-
2023 Global Forecast for Thermosetting resins and plastics materials, urea (2023-2028 Outlook)-Manufacturing & Markets Report
... countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of ... Read More
-
2023 Global Forecast for Thermoplastics elastomers (2023-2028 Outlook)-Manufacturing & Markets Report
... or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of all products produced and ... Read More
-
2023 Global Forecast for Thermosetting resins and plastics materials, phenolic (2023-2028 Outlook)-Manufacturing & Markets Report
... countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of ... Read More
-
2023 Global Forecast for Other elastomers, excluding thermoplastic elastomers, including latex (2023-2028 Outlook)-Manufacturing & Markets Report
... 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value ... Read More
-
Injection Molded Plastics Market Size By Raw Material (Polystyrene, HDPE, ABS, Polypropylene), By Application (Building & Construction, Automotive, Consumables & Electronics, Packaging), Industry Analysis Report, Regional Outlook, Application Potential, Price Trends, Competitive Market Share & Forecast, 2018 - 2032
... Forecast, 2018 - 2032 The global injection molded plastics market is poised to grow steadily through 2032 owing to the rapid expansion of the packaging industry. The shift in consumer preference toward lightweight, simple-to-use packaging ... Read More
-
2023 Global Forecast for Thermoplastic resins and plastics materials, polystyrene (2023-2028 Outlook)-Manufacturing & Markets Report
... countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of ... Read More
-
2023 Global Forecast for Custom compounding of purchased resins (2023-2028 Outlook)-Manufacturing & Markets Report
... Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of all ... Read More
-
2023 Global Forecast for Other synthetic resin and rubber adhesives, including cellulose, nitrocellulose, polyamide, anaerobic, etc. (2023-2028 Outlook)-Manufacturing & Markets Report
... on the market for over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product ... Read More
-
2023 Global Forecast for Synthetic-base nonstructural (non-load-bearing) special performance sealants (polysulfide, silcone, epoxy, etc.) (2023-2028 Outlook)-Manufacturing & Markets Report
... market for over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include ... Read More
-
2023 Global Forecast for Rubber and synthetic resin combinations (2023-2028 Outlook)-Manufacturing & Markets Report
... Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of all ... Read More
-
2023 Global Forecast for Thermosetting resins and plastics materials, epoxy (2023-2028 Outlook)-Manufacturing & Markets Report
... countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of ... Read More
-
2023 Global Forecast for Thermoplastic resins and plastics materials, polyvinyl chloride (2023-2028 Outlook)-Manufacturing & Markets Report
... 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value ... Read More
-
2023 Global Forecast for Thermoplastic resins and plastics materials, polyester (2023-2028 Outlook)-Manufacturing & Markets Report
... countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of ... Read More
-
2023 Global Forecast for Thermosetting resins and plastics materials, polyester (2023-2028 Outlook)-Manufacturing & Markets Report
... countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of ... Read More
-
2023 Global Forecast for Other thermosetting resins and plastics materials (2023-2028 Outlook)-Manufacturing & Markets Report
... countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of ... Read More
-
2023 Global Forecast for Epoxy adhesives (2023-2028 Outlook)-Manufacturing & Markets Report
... or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include the total value of all products produced and ... Read More
-
2023 Global Forecast for Resins in the form of pellets from spent/post consumer plastics (2023-2028 Outlook)-Manufacturing & Markets Report
... market for over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2028. Product shipments include ... Read More
-
India DCPD UPR Grade Resin Market, by Application (Paints and Coating, Construction, Marine, Automotives, Electronics, Others), Regions (East India, West India, North India, South India), Trend Analysis, Competitive Market Share & Forecast, 2018-2028
... UPR Grade Resin Market to Boost in Coming Years – Projected to Reach Worth USD 114.41 Million in 2028 The UPR Grade Resin market is expanding as a result of rising demand for polymers and ... Read More
-
Plastic Calendering Resins Market Size, Share & Trends Analysis Report By Type (PVC, PET, PP, PETG), By End-use (Food & Beverages, Healthcare & Medical, Automotive), By Region, And Segment Forecasts, 2022 - 2030
... Resins Market Growth & Trends The global plastic calendering resins market size is anticipated to reach USD 29.8 billion by 2030, according to a new report by Grand View Research, Inc. It is expected to ... Read More
-
Plastic Compounding Market Size, By Product (Thermoplastic Polymers [Polyethylene, Polypropylene, Polyester, Polycarbonate, Polyethylene Terephthalate, Polyvinyl Chloride, Acrylonitrile Butadiene Styrene, Polybutylene Terephthalate, Poly Methyl Methacrylate, Polyoxymethylene], Thermosetting Polymers [Polyurethane Resin, Epoxy Resin], Thermoplastic Elastomers [Polyamides, Polyurethanes, SBC]), By Application (Consumer Goods, Electrical & Electronics, Construction, Automotive, Aerospace), Industry Analysis Report, Regional Outlook, Application Growth Potential, Price Trends, Competitive Market Share & Forecast, 2023 - 2032
... SBC]), By Application (Consumer Goods, Electrical & Electronics, Construction, Automotive, Aerospace), Industry Analysis Report, Regional Outlook, Application Growth Potential, Price Trends, Competitive Market Share & Forecast, 2023 - 2032 The global plastic compounding market is ... Read More
Research Assistance
