Resins Market Research Reports & Industry Analysis
Resin as a synthetic compound begins in a highly sticky, thick state and hardens with treatment. Generally, resin is soluble in alcohol. There are different classes of resin, dependent upon exact chemical composition and potential uses. There are many uses for resins, ranging from art to polymer production.
A classic example of resin is pine sap, which has the characteristic sharp odor of terpene compounds. Some plants produce a similar substance called gum or gum resin which is soluble with water. Gum tends to be softer and more malleable than resin.
It has also been used as a component in lacquer, jewelry, inks, perfumes, varnish, and many other products. Technological advances realized the formulation of resins into polymers, and the discovery of synthetic resins followed shortly after.
Polymers are made with synthetic resin, which is cheaper and easier to refine. Synthetic resin is more stable, predictable, and uniform than natural resin as it is made under controlled conditions preventing impurities. These resins are made by combining chemicals to stimulate a reaction which results in the formulation of a resinous compound. Synthetic resin can be used in the production of plastics, paints, and many of the same substances that natural resin is used in.
Resins Industry Research & Market Reports
-
South America Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The South America plastics for composites market is expected to grow from US$ 644.92 million in 2022 to US$ 778.23 million by ... Read More
-
North America Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The North America plastics for composites market is expected to grow from US$ 6,692.57 million in 2022 to US$ 8,521.59 million by ... Read More
-
2023 Global Forecast for Other thermoplastic resins and plastics materials (2024-2029 Outlook)-Manufacturing & Markets Report
... over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2029. Product shipments include the total ... Read More
-
Europe Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The Europe plastics for composites market is expected to grow from US$ 4,981.88 million in 2022 to US$ 6,591.33 million by 2028; it ... Read More
-
Global Conductive Plastic Compounds Market
... made from conductive plastic blends are recyclable, lightweight, and provide protection against static charge scattering in electronic applications. Conductive plastic compounds are made up of conductive fillers with high electrical conductivity. By Resin Type Polystyrene ... Read More
-
2023 Global Forecast for Thermoplastic resins and plastics materials, polyethylene (2024-2029 Outlook)-Manufacturing & Markets Report
... over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2029. Product shipments include the total ... Read More
-
2023 Global Forecast for Thermoplastic resins and plastics materials, polypropylene (2024-2029 Outlook)-Manufacturing & Markets Report
... over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2029. Product shipments include the total ... Read More
-
Middle East & Africa Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The Middle East & Africa plastics for composites market is expected to grow from US$ 897.15 million in 2022 to ... Read More
-
Prepreg Market By Resin Type (Thermoset, Thermoplastic), By Fiber Type (Carbon, Glass, Aramid), By Manufacturing Process (Hot-melt, Solvent dip), By End User Industry (Aerospace and Defence, Automotive, Wind Energy, Sporting Goods, Others): Global Opportunity Analysis and Industry Forecast, 2021-2031
... and Industry Forecast, 2021-2031 The global prepreg market was valued at $6.3 billion in 2021, and is projected to reach $16.1 billion by 2031, growing at a CAGR of 9.9% from 2022 to 2031. Prepreg ... Read More
-
Long Fiber Thermoplastics Market by Fiber Type (Glass, Carbon), Resin Type (PA, PP, PEEK, PPA), Manufacturing Process (Injection Molding, Pultrusion, Direct-LFT (D-LFT)), End-use Industry and Region - Global Forecast to 2027
... thermoplastics market size is expected to grow from USD 3.5 Billion in 2021 to USD 6.1 Billion by 2027, at a CAGR of 9.3% during the forecast period. The long fiber thermoplastics offer exceptional properties, ... Read More
-
2023 Global Forecast for Powder coatings, thermoset, general decorative, architectural, including aluminum extrusions (2024-2029 Outlook)-Manufacturing & Markets Report
... the market for over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2029. Product shipments ... Read More
-
Global Rubber Tackifier Resins Market Research Report 2023
... of 5.37% during the forecast period 2023-2029. The influence of COVID-19 and the Russia-Ukraine War were considered while estimating market sizes. North American market for Rubber Tackifier Resins is estimated to increase from $ 197.19 ... Read More
-
Asia Pacific Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The Asia Pacific plastics for composites market is expected to grow from US$ 10,120.73 million in 2022 to US$ 13,525.08 million by ... Read More
-
Composites Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Fiber Type (Carbon Fiber Composites, Glass Fiber Composites, and Others), Resin Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)], and End-Use Industry (Automotive, Aerospace & Defense, Wind, Construction, Marine, Sporting Goods, and Others)
... Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)], and End-Use Industry (Automotive, Aerospace & Defense, Wind, Construction, Marine, Sporting Goods, and Others) The composites market size is expected to grow from US$ 88,710.42 million in ... Read More
-
Plastics in Electronics Components: Technologies and Global Markets
... encapsulation. It does not cover wire and cable, films used in capacitors or recording media, or enclosures. The study also identifies major material suppliers and key processors. It reviews important new technologies, as well as ... Read More
-
Middle East & Africa Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... Others) The Middle East & Africa pressure vessel composite materials market is expected to grow from US$ 87.88 million in 2022 to US$ 239.95 million by 2028; it is estimated to grow at a CAGR ... Read More
-
Europe Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... pressure vessel composite materials market is expected to grow from US$ 304.96 million in 2022 to US$ 913.68 million by 2028; it is estimated to grow at a CAGR of 20.1% from 2022 to 2028 ... Read More
-
Asia Pacific Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... Asia Pacific pressure vessel composite materials market is expected to grow from US$ 418.51 million in 2022 to US$ 1,312.55 million by 2028; it is estimated to grow at a CAGR of 21.0% from 2022 ... Read More
-
South America Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... South America pressure vessel composite materials market is expected to grow from US$ 52.57 million in 2022 to US$ 147.29 million by 2028; it is estimated to grow at a CAGR of 18.7% from 2022 ... Read More
-
North America Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... North America pressure vessel composite materials market is expected to grow from US$ 198.70 million in 2022 to US$ 610.62 million by 2028; it is estimated to grow at a CAGR of 20.6% from 2022 ... Read More
-
Unsaturated Polyester Resins Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2028
... reach US$ 17.6 Billion by 2028, exhibiting a growth rate (CAGR) of 5.9% during 2023-2028. An unsaturated polyester resin (UPR) is a form of thermoset moulding resin that is used for the manufacturing of glass ... Read More
-
UV-Curable Adhesives Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2028
... 497.9 Million by 2028, exhibiting a growth rate (CAGR) of 6.89% during 2023-2028. A UV-curable adhesive is a type of light-curing adhesive that cures through UV light exposure without requiring any heating, making it ideal ... Read More
-
Machine-Direction Orientation (MDO) Films Market by Material Type (Polypropylene (PP), High Density Polyethylene (HDPE), Linear Low Density Polyethylene (LLDPE), Linear Density Polyethylene (LDPE), Polyamide (PA), Ethyl Vinyl Alcohol (EVOH), Polyethylene
... Process (Cast Films, Blown Films), Application (Bags and Pouches, Shrink Labels, Shrink Wrap, Agro Textile, Tapes, Liners, and Others), End Use Industry (Food and Beverages, Healthcare, Personal Care, Homecare, Agriculture, and Others), and Region 2023-2028 ... Read More
-
Thermoplastic Vulcanizates Market by Processing Method (Injection Molding, Extrusion), Application (Automotive, Footwear, Consumer Goods, Fluid Handling, Medical), and Region (North America, Europe, South America, APAC, MEA) - Global Forecast to 2032
... vulcanizates is approximated to be USD 2.6 billion in 2022, and it is projected to reach USD 4.9 billion by 2032 at a CAGR of 6.5%. Out of three processing methods (Injection Molding, Extrusion, and ... Read More
-
Global Automotive Adhesives Market Size study & Forecast, by Resin (Polyurethane, Epoxy, Acrylics, Silicone, Silyl-Modified Polymers (SMPs), Methyl Methacrylate Adhesives (MMAs), Others), By Application (Body in white, Paint shop, Assembly, Powertrain), Based on Vehicle Type (Passenger car, LCV, Truck, Bus, Aftermarket) and Regional Analysis, 2022-2029
... (Passenger car, LCV, Truck, Bus, Aftermarket) and Regional Analysis, 2022-2029 Global Automotive Adhesives Market is valued approximately USD XXX billion in 2021 and is anticipated to grow with a healthy growth rate of more than ... Read More
Research Assistance
