Resins Market Research Reports & Industry Analysis
Resin as a synthetic compound begins in a highly sticky, thick state and hardens with treatment. Generally, resin is soluble in alcohol. There are different classes of resin, dependent upon exact chemical composition and potential uses. There are many uses for resins, ranging from art to polymer production.
A classic example of resin is pine sap, which has the characteristic sharp odor of terpene compounds. Some plants produce a similar substance called gum or gum resin which is soluble with water. Gum tends to be softer and more malleable than resin.
It has also been used as a component in lacquer, jewelry, inks, perfumes, varnish, and many other products. Technological advances realized the formulation of resins into polymers, and the discovery of synthetic resins followed shortly after.
Polymers are made with synthetic resin, which is cheaper and easier to refine. Synthetic resin is more stable, predictable, and uniform than natural resin as it is made under controlled conditions preventing impurities. These resins are made by combining chemicals to stimulate a reaction which results in the formulation of a resinous compound. Synthetic resin can be used in the production of plastics, paints, and many of the same substances that natural resin is used in.
Resins Industry Research & Market Reports
-
Global Resin Type Pressure Sensitive Adhesive Market 2023 by Manufacturers, Regions, Type and Application, Forecast to 2029
... valued at USD million in 2022 and is forecast to a readjusted size of USD million by 2029 with a CAGR of % during review period. The influence of COVID-19 and the Russia-Ukraine War were ... Read More
-
Global Resin Type Pressure Sensitive Adhesive Supply, Demand and Key Producers, 2023-2029
... % CAGR during the forecast period (2023-2029). Resin-type pressure-sensitive adhesives are classified according to the composition of the main resin. In addition to the main resin, resin-type pressure-sensitive adhesives also need to add defoamers, leveling ... Read More
-
Middle East & Africa Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... Others) The Middle East & Africa pressure vessel composite materials market is expected to grow from US$ 87.88 million in 2022 to US$ 239.95 million by 2028; it is estimated to grow at a CAGR ... Read More
-
Plastics in Electronics Components: Technologies and Global Markets
... encapsulation. It does not cover wire and cable, films used in capacitors or recording media, or enclosures. The study also identifies major material suppliers and key processors. It reviews important new technologies, as well as ... Read More
-
South America Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... South America pressure vessel composite materials market is expected to grow from US$ 52.57 million in 2022 to US$ 147.29 million by 2028; it is estimated to grow at a CAGR of 18.7% from 2022 ... Read More
-
Europe Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... pressure vessel composite materials market is expected to grow from US$ 304.96 million in 2022 to US$ 913.68 million by 2028; it is estimated to grow at a CAGR of 20.1% from 2022 to 2028 ... Read More
-
North America Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... North America pressure vessel composite materials market is expected to grow from US$ 198.70 million in 2022 to US$ 610.62 million by 2028; it is estimated to grow at a CAGR of 20.6% from 2022 ... Read More
-
Asia Pacific Pressure Vessel Composite Materials Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Material (Resin, Fiber, and Others) and End User (CNG Vehicles, Hydrogen Vehicle, Gas Transport, and Others)
... Asia Pacific pressure vessel composite materials market is expected to grow from US$ 418.51 million in 2022 to US$ 1,312.55 million by 2028; it is estimated to grow at a CAGR of 21.0% from 2022 ... Read More
-
Global Resins in Gum base Market Research Report 2023-Competitive Analysis, Status and Outlook by Type, Downstream Industry, and Geography, Forecast to 2029
... solid substance. It is the basic chewing substance in chewing gum and bubble gum. Generally speaking, the Gum Base is made of rubber, resin, filler, wax, emulsifier, and antioxidant. The resin provides cohesion or strength ... Read More
-
Global Polycarbonate (Pc) Resin Market Research Report 2023-Competitive Analysis, Status and Outlook by Type, Downstream Industry, and Geography, Forecast to 2029
... chemical structure, which is a kind of engineering plastics. Polycarbonate (Pc) Resin has excellent mechanical, thermal and optical properties. At present, Polycarbonate (Pc) Resin is widely used in Electronic Components, Construction Materials, Automobiles, Packaging and ... Read More
-
Unsaturated Polyester Resins Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2028
... reach US$ 17.6 Billion by 2028, exhibiting a growth rate (CAGR) of 5.9% during 2023-2028. An unsaturated polyester resin (UPR) is a form of thermoset moulding resin that is used for the manufacturing of glass ... Read More
-
UV-Curable Adhesives Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2028
... 497.9 Million by 2028, exhibiting a growth rate (CAGR) of 6.89% during 2023-2028. A UV-curable adhesive is a type of light-curing adhesive that cures through UV light exposure without requiring any heating, making it ideal ... Read More
-
Machine-Direction Orientation (MDO) Films Market by Material Type (Polypropylene (PP), High Density Polyethylene (HDPE), Linear Low Density Polyethylene (LLDPE), Linear Density Polyethylene (LDPE), Polyamide (PA), Ethyl Vinyl Alcohol (EVOH), Polyethylene
... Process (Cast Films, Blown Films), Application (Bags and Pouches, Shrink Labels, Shrink Wrap, Agro Textile, Tapes, Liners, and Others), End Use Industry (Food and Beverages, Healthcare, Personal Care, Homecare, Agriculture, and Others), and Region 2023-2028 ... Read More
-
Thermoplastic Vulcanizates Market by Processing Method (Injection Molding, Extrusion), Application (Automotive, Footwear, Consumer Goods, Fluid Handling, Medical), and Region (North America, Europe, South America, APAC, MEA) - Global Forecast to 2032
... vulcanizates is approximated to be USD 2.6 billion in 2022, and it is projected to reach USD 4.9 billion by 2032 at a CAGR of 6.5%. Out of three processing methods (Injection Molding, Extrusion, and ... Read More
-
Global Automotive Adhesives Market Size study & Forecast, by Resin (Polyurethane, Epoxy, Acrylics, Silicone, Silyl-Modified Polymers (SMPs), Methyl Methacrylate Adhesives (MMAs), Others), By Application (Body in white, Paint shop, Assembly, Powertrain), Based on Vehicle Type (Passenger car, LCV, Truck, Bus, Aftermarket) and Regional Analysis, 2022-2029
... (Passenger car, LCV, Truck, Bus, Aftermarket) and Regional Analysis, 2022-2029 Global Automotive Adhesives Market is valued approximately USD XXX billion in 2021 and is anticipated to grow with a healthy growth rate of more than ... Read More
-
Packaging Resin Market Size- By Type, By Application- Regional Outlook, Competitive Strategies and Segment Forecast to 2032
... reach USD 202.46 billion by 2032 with a CAGR of 7.33%. The Global Packaging Resin Market refers to the production and sale of polymers and plastics that are used for packaging products in various industries, ... Read More
-
2023 Global: Cast Resin Dry Transformer - Innovative Markets Forecast (2029) report
... industry forecasts based on our proprietary economic models. Our forecasts project the product market size nationally and by regions for 2018 to 2029 using regression analysis in our modeling. and Perry/Hope is the only market ... Read More
-
2023 Global: Cyanate Ester Resins Market - Innovative Markets Forecast (2029) report
... industry forecasts based on our proprietary economic models. Our forecasts project the product market size nationally and by regions for 2018 to 2029 using regression analysis in our modeling. and Perry/Hope is the only market ... Read More
-
Global Heat Stabilizers Market - 2023-2030
... of XX% during the forecast period (2023-2030). Heat stabilizers are commonly used in polyvinyl chloride (PVC) to protect it against high temperatures in the processes resin might use. The high heat it may encounter in ... Read More
-
Global Polyurethane Resin for Non-Woven Fabric Market Growth 2023-2029
... Fabric sales in 2022, providing a comprehensive analysis by region and market sector of projected Polyurethane Resin for Non-Woven Fabric sales for 2023 through 2029. With Polyurethane Resin for Non-Woven Fabric sales broken down by ... Read More
-
Global Polyurethane Sandwich Panels Market Growth 2023-2029
... LPI (LP Information)' newest research report, the “Polyurethane Sandwich Panels Industry Forecast” looks at past sales and reviews total world Polyurethane Sandwich Panels sales in 2022, providing a comprehensive analysis by region and market sector ... Read More
-
Global MDI-based PU Soles (Footwear Polyurethane) Market Growth 2023-2029
... in footwear sales, and increased production in a growing economy are expected to promote the development of the PU sole (shoe polyurethane) market. Casual shoes are defined as shoes that are worn daily for comfort ... Read More
-
North America Medical Tubing Market Forecast to 2028 – COVID-19 Impact and Regional Analysis– by Material [Polyvinyl Chloride (PVC), Polyimide/Nylons, PTFE/Thermoplastic Elastomers (TPES), Thermoplastic Polyurethanes (TPUS), Polyvinylidene Fluoride (PVDF), Polypropylene and Polyethylene, Silicon, and Others], Structure (Single-Lumen, Multi-Lumen, Multi-Layer Extruded Tubing, Tapered or Bump Tubing, Braided Tubing, Balloon Tubing, Corrugated Tubing, Heat Shrink Tubing, and Others), Application (Bulk Disposable Tubing, Catheter & Cannula, Drug Delivery System, and Others), and End User (Hospitals and Clinics, Ambulatory Care Centres, Medical Device Companies, Laboratories, and Others)
... Structure (Single-Lumen, Multi-Lumen, Multi-Layer Extruded Tubing, Tapered or Bump Tubing, Braided Tubing, Balloon Tubing, Corrugated Tubing, Heat Shrink Tubing, and Others), Application (Bulk Disposable Tubing, Catheter & Cannula, Drug Delivery System, and Others), and End ... Read More
-
Middle East & Africa Medical Tubing Market Forecast to 2028 – COVID-19 Impact and Regional Analysis– by Material [Polyvinyl Chloride (PVC), Polyimide/Nylons, PTFE/Thermoplastic Elastomers (TPES), Thermoplastic Polyurethanes (TPUS), Polyvinylidene Fluoride (PVDF), Polypropylene and Polyethylene, Silicon, and Others], Structure (Single-Lumen, Multi-Lumen, Multi-Layer Extruded Tubing, Tapered or Bump Tubing, Braided Tubing, Balloon Tubing, Corrugated Tubing, Heat Shrink Tubing, and Others), Application (Bulk Disposable Tubing, Catheter & Cannula, Drug Delivery System, and Others), and End User (Hospitals and Clinics, Ambulatory Care Centres, Medical Device Companies, Laboratories, and Others)
... and Others], Structure (Single-Lumen, Multi-Lumen, Multi-Layer Extruded Tubing, Tapered or Bump Tubing, Braided Tubing, Balloon Tubing, Corrugated Tubing, Heat Shrink Tubing, and Others), Application (Bulk Disposable Tubing, Catheter & Cannula, Drug Delivery System, and Others), ... Read More
-
South & Central America Medical Tubing Market Forecast to 2028 – COVID-19 Impact and Regional Analysis– by Material [Polyvinyl Chloride (PVC), Polyimide/Nylons, PTFE/Thermoplastic Elastomers (TPES), Thermoplastic Polyurethanes (TPUS), Polyvinylidene Fluoride (PVDF), Polypropylene and Polyethylene, Silicon, and Others], Structure (Single-Lumen, Multi-Lumen, Multi-Layer Extruded Tubing, Tapered or Bump Tubing, Braided Tubing, Balloon Tubing, Corrugated Tubing, Heat Shrink Tubing, and Others), Application (Bulk Disposable Tubing, Catheter & Cannula, Drug Delivery System, and Others), and End User (Hospitals and Clinics, Ambulatory Care Centres, Medical Device Companies, Laboratories, and Others)
... and Others], Structure (Single-Lumen, Multi-Lumen, Multi-Layer Extruded Tubing, Tapered or Bump Tubing, Braided Tubing, Balloon Tubing, Corrugated Tubing, Heat Shrink Tubing, and Others), Application (Bulk Disposable Tubing, Catheter & Cannula, Drug Delivery System, and Others), ... Read More
Research Assistance
