Resins Market Research Reports & Industry Analysis
Resin as a synthetic compound begins in a highly sticky, thick state and hardens with treatment. Generally, resin is soluble in alcohol. There are different classes of resin, dependent upon exact chemical composition and potential uses. There are many uses for resins, ranging from art to polymer production.
A classic example of resin is pine sap, which has the characteristic sharp odor of terpene compounds. Some plants produce a similar substance called gum or gum resin which is soluble with water. Gum tends to be softer and more malleable than resin.
It has also been used as a component in lacquer, jewelry, inks, perfumes, varnish, and many other products. Technological advances realized the formulation of resins into polymers, and the discovery of synthetic resins followed shortly after.
Polymers are made with synthetic resin, which is cheaper and easier to refine. Synthetic resin is more stable, predictable, and uniform than natural resin as it is made under controlled conditions preventing impurities. These resins are made by combining chemicals to stimulate a reaction which results in the formulation of a resinous compound. Synthetic resin can be used in the production of plastics, paints, and many of the same substances that natural resin is used in.
Resins Industry Research & Market Reports
-
Global Plastic Resins Market Report and Forecast 2023-2028
... the expanding applications in various industries, the market is projected to further grow at a CAGR of 4.9% between 2023 and 2028 to reach a value of USD 842.37 billion by 2028. Plastic resins, also ... Read More
-
Polyurethane Dispersions Market Forecasts to 2028 – Global Analysis By Type (Low-Solvent, Solvent Based, Water Based and Other Types), Application (Leather Finishing, Paints & Coatings and Other Applications) and Geography
... Global Polyurethane Dispersions Market is accounted for $2.26 billion in 2022 and is expected to reach $3.81 billion by 2028 growing at a CAGR of 9.1% during the forecast period. PUD, or polyurethane dispersion, is ... Read More
-
Global Heat Resistant ABS Resin Market Research Report 2023-Competitive Analysis, Status and Outlook by Type, Downstream Industry, and Geography, Forecast to 2029
... as high impact resistance and high flow characteristics. The most common heat-resistant temperature requirements for electrical, electronic components and auto parts are materials that must be higher than the Vicat softening temperature (VST) 100°C to ... Read More
-
Decorative Laminates Market Forecasts to 2028 – Global Analysis By Type (General Purpose, Special Products, Backer and Post forming), Product Type (High Pressure Laminates, Low Pressure Laminates and Other Product Types), Resin Material (Phenolic, Melamine, Polyester, Silicone and Other Resin Materials), By Raw Material (Plastic resins, Overlays, Adhesives and Wood substrate), Application (Wall Panel, Flooring, Furniture and Cabinets and Other Applications), End User (Residential, Commercial, Transportation and Automotive) and Geography
... Polyester, Silicone and Other Resin Materials), By Raw Material (Plastic resins, Overlays, Adhesives and Wood substrate), Application (Wall Panel, Flooring, Furniture and Cabinets and Other Applications), End User (Residential, Commercial, Transportation and Automotive) and Geography ... Read More
-
Epoxy Curing Agents Market, By Product Type (Low Temperature Cure and High Temperature Cure), By Application (Marine, Industrial & Protective, Construction, Adhesive and Others), By Region (North America, Latin America, Europe, Middle East, Africa, and Asia Pacific)- Size, Share, Outlook, and Opportunity Analysis, 2023 - 2030
... Asia Pacific)- Size, Share, Outlook, and Opportunity Analysis, 2023 - 2030 Epoxy curing agents have a wide range of applications in industrial coatings, civil engineering & construction, automotive, and metal-to-metal adhesives, composites, and electronic potting, ... Read More
-
Dimethyl Carbonate Market Forecasts to 2028 – Global Analysis By Grade (Industrial Grade (≤99%), Reagent Grade (99.1% - 99.8%) and Battery Grade (≥99.9%)), Application (Polycarbonate, Fuel Additive, Solvent, Lithium Battery , Pharmaceuticals, Pesticides and Other Applications), End User (Plastic, Paints & Coatings, Medical, Electronics, Agrochemicals and Other End Users) and Geography
... Applications), End User (Plastic, Paints & Coatings, Medical, Electronics, Agrochemicals and Other End Users) and Geography According to Stratistics MRC, the Global Dimethyl Carbonate Market is accounted for $1.1 billion in 2022 and is expected ... Read More
-
South America Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The South America plastics for composites market is expected to grow from US$ 644.92 million in 2022 to US$ 778.23 million by ... Read More
-
Global Polybutylene Succinate (PBS) Market Study 2016-2032
... Data & Forecast (Short-term and Long-term) Demand Analysis Demand Composition, By Applications Sales & Revenue Pricing Analysis Market Dynamics Country Summaries & Product Review Demand Balance Polybutylene Succinate Market data in terms of volume and ... Read More
-
North America Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The North America plastics for composites market is expected to grow from US$ 6,692.57 million in 2022 to US$ 8,521.59 million by ... Read More
-
2023 Global Forecast for Other thermoplastic resins and plastics materials (2024-2029 Outlook)-Manufacturing & Markets Report
... over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2029. Product shipments include the total ... Read More
-
Europe Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The Europe plastics for composites market is expected to grow from US$ 4,981.88 million in 2022 to US$ 6,591.33 million by 2028; it ... Read More
-
Global Conductive Plastic Compounds Market
... made from conductive plastic blends are recyclable, lightweight, and provide protection against static charge scattering in electronic applications. Conductive plastic compounds are made up of conductive fillers with high electrical conductivity. By Resin Type Polystyrene ... Read More
-
2023 Global Forecast for Thermoplastic resins and plastics materials, polyethylene (2024-2029 Outlook)-Manufacturing & Markets Report
... over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2029. Product shipments include the total ... Read More
-
Middle East & Africa Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The Middle East & Africa plastics for composites market is expected to grow from US$ 897.15 million in 2022 to ... Read More
-
2023 Global Forecast for Thermoplastic resins and plastics materials, polypropylene (2024-2029 Outlook)-Manufacturing & Markets Report
... over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2029. Product shipments include the total ... Read More
-
Prepreg Market By Resin Type (Thermoset, Thermoplastic), By Fiber Type (Carbon, Glass, Aramid), By Manufacturing Process (Hot-melt, Solvent dip), By End User Industry (Aerospace and Defence, Automotive, Wind Energy, Sporting Goods, Others): Global Opportunity Analysis and Industry Forecast, 2021-2031
... and Industry Forecast, 2021-2031 The global prepreg market was valued at $6.3 billion in 2021, and is projected to reach $16.1 billion by 2031, growing at a CAGR of 9.9% from 2022 to 2031. Prepreg ... Read More
-
Composites Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Fiber Type (Carbon Fiber Composites, Glass Fiber Composites, and Others), Resin Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)], and End-Use Industry (Automotive, Aerospace & Defense, Wind, Construction, Marine, Sporting Goods, and Others)
... Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)], and End-Use Industry (Automotive, Aerospace & Defense, Wind, Construction, Marine, Sporting Goods, and Others) The composites market size is expected to grow from US$ 88,710.42 million in ... Read More
-
Canada Adhesives Market, By Technology (Reactive, Hot Melt, Solvent Based, and Water Based), By Resin Type (Polyurethane Adhesives, Vinyl Adhesives, Acrylic Adhesives, Rubber Based Adhesives, Epoxy Adhesives, Others), By End User Industry (Furniture, Construction, Packaging & Paper Related Products, Transportation, DIY, Others), By Region, Competition Forecast and Opportunities, 2027
... & Paper Related Products, Transportation, DIY, Others), By Region, Competition Forecast and Opportunities, 2027 Canada Adhesives Market is expected to increase at an impressive rate in the projected period. Adhesives are polymers with an enclosed ... Read More
-
Long Fiber Thermoplastics Market by Fiber Type (Glass, Carbon), Resin Type (PA, PP, PEEK, PPA), Manufacturing Process (Injection Molding, Pultrusion, Direct-LFT (D-LFT)), End-use Industry and Region - Global Forecast to 2027
... thermoplastics market size is expected to grow from USD 3.5 Billion in 2021 to USD 6.1 Billion by 2027, at a CAGR of 9.3% during the forecast period. The long fiber thermoplastics offer exceptional properties, ... Read More
-
2023 Global Forecast for Powder coatings, thermoset, general decorative, architectural, including aluminum extrusions (2024-2029 Outlook)-Manufacturing & Markets Report
... the market for over 40 countries. Estimates on equipment or material sales (product shipments value) are published historically for 2016 to 2020, projections for 2021 to 2023 and forecasts for 2024 to 2029. Product shipments ... Read More
-
Asia Pacific Plastics for Composites Market Forecast to 2028 – COVID-19 Impact and Regional Analysis – by Type [Thermoset (Polyester, Vinyl Ester, Epoxy, Polyurethane, and Others) and Thermoplastic (Polypropylene, Polyethylene, Polyvinylchloride, Polystyrene, Polyethylene Terephthalate, Polycarbonate, and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others)
... and Others)] and Technology (Injection Molding, Compression Molding, Pultrusion, Resin Infusion, and Others) The Asia Pacific plastics for composites market is expected to grow from US$ 10,120.73 million in 2022 to US$ 13,525.08 million by ... Read More
-
Global Rubber Tackifier Resins Market Research Report 2023
... of 5.37% during the forecast period 2023-2029. The influence of COVID-19 and the Russia-Ukraine War were considered while estimating market sizes. North American market for Rubber Tackifier Resins is estimated to increase from $ 197.19 ... Read More
-
Global Nuclear Grade Cationic Resins Supply, Demand and Key Producers, 2023-2029
... during the forecast period (2023-2029). Nuclear grade strongly acidic cation exchange resin. Strong acid cation resin will replace all the cations in raw water with hydrogen ions, thus reducing the dissolved solids in raw water. ... Read More
-
Global Polyurethane Resins Paint and Coating Supply, Demand and Key Producers, 2023-2029
... % CAGR during the forecast period (2023-2029). This report studies the global Polyurethane Resins Paint and Coating production, demand, key manufacturers, and key regions. This report is a detailed and comprehensive analysis of the world ... Read More
-
Global Polyurethane Resins Paint and Coating Market 2023 by Manufacturers, Regions, Type and Application, Forecast to 2029
... valued at USD million in 2022 and is forecast to a readjusted size of USD million by 2029 with a CAGR of % during review period. The influence of COVID-19 and the Russia-Ukraine War were ... Read More
Research Assistance
