Resins Market Research Reports & Industry Analysis
Resin as a synthetic compound begins in a highly sticky, thick state and hardens with treatment. Generally, resin is soluble in alcohol. There are different classes of resin, dependent upon exact chemical composition and potential uses. There are many uses for resins, ranging from art to polymer production.
A classic example of resin is pine sap, which has the characteristic sharp odor of terpene compounds. Some plants produce a similar substance called gum or gum resin which is soluble with water. Gum tends to be softer and more malleable than resin.
It has also been used as a component in lacquer, jewelry, inks, perfumes, varnish, and many other products. Technological advances realized the formulation of resins into polymers, and the discovery of synthetic resins followed shortly after.
Polymers are made with synthetic resin, which is cheaper and easier to refine. Synthetic resin is more stable, predictable, and uniform than natural resin as it is made under controlled conditions preventing impurities. These resins are made by combining chemicals to stimulate a reaction which results in the formulation of a resinous compound. Synthetic resin can be used in the production of plastics, paints, and many of the same substances that natural resin is used in.
Resins Industry Research & Market Reports
-
2023 Global Forecast for Reactive Diluents Market (2024-2029 Outlook)-High Tech & Emerging Markets Report
... or service category is within the NAICS Chemical Manufacturing industry. The product or service category is within the NAICS Chemical Manufacturing industry. The global market is expected to increase from USD xx billion in 2024 ... Read More
-
2023 Global Forecast for Thermoplastic Polyurethane Films (Tpu) Market (2024-2029 Outlook)-High Tech & Emerging Markets Report
... The product or service category is within the NAICS Plastics and Rubber Mfg. industry. The product or service category is within the NAICS Plastics and Rubber Mfg. industry. The global market is expected to increase ... Read More
-
Global Polypropylene Tying Twine Market 2023 by Manufacturers, Regions, Type and Application, Forecast to 2029
... in 2022 and is forecast to a readjusted size of USD million by 2029 with a CAGR of % during review period. The Global Info Research report includes an overview of the development of the ... Read More
-
Global Light Duty Polypropylene Twine Supply, Demand and Key Producers, 2023-2029
... during the forecast period (2023-2029). This report studies the global Light Duty Polypropylene Twine production, demand, key manufacturers, and key regions. This report is a detailed and comprehensive analysis of the world market for Light ... Read More
-
Global Polypropylene Tying Twine Supply, Demand and Key Producers, 2023-2029
... forecast period (2023-2029). This report studies the global Polypropylene Tying Twine production, demand, key manufacturers, and key regions. This report is a detailed and comprehensive analysis of the world market for Polypropylene Tying Twine, and ... Read More
-
Global Light Duty Polypropylene Twine Market 2023 by Manufacturers, Regions, Type and Application, Forecast to 2029
... USD million in 2022 and is forecast to a readjusted size of USD million by 2029 with a CAGR of % during review period. The Global Info Research report includes an overview of the development ... Read More
-
Global Solvent Based Acrylic and Alkyd Resins Market Research Report 2023-Competitive Analysis, Status and Outlook by Type, Downstream Industry, and Geography, Forecast to 2029
... Acrylic and Alkyd Resins market finds that the global Solvent Based Acrylic and Alkyd Resins market reached a value of USD 8107.16 million in 2022. It’s expected that the market will achieve USD 9810.16 million ... Read More
-
Purified Terephthalic Acid (PTA) Industry Installed Capacity and Capital Expenditure (CapEx) Forecast by Region and Countries including details of All Active Plants, Planned and Announced Projects
... to see considerable growth over the next five years, potentially increasing from 117.86 mtpa in 2022 to 171.16 mtpa in 2027, registering total growth of 45%. Around 32 planned and announced PTA projects are expected ... Read More
-
Contact Adhesive Market by Resin Type (Neoprene, Polyurethane, Acrylic, SBC), Technology (Solvent-Based, Water-Based), End-use Industry (Woodworking, Leather & Footwear, Automotive), Region (North America, Europe, APAC, MEA)- Global Forecast to 2028
... size is projected to grow from USD 2.8 billion in 2023 to USD 3.5 billion, at a CAGR of 4.3%. The advancements in adhesives production are mostly determined by the raw materials, technology, and applications ... Read More
-
Recycled PET Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2023-2030 - By Product, Technology, Grade, Application, End-user, Region: (North America, Europe, Asia Pacific, Latin America and Middle East and Africa)
... global recycled PET market is expected to experience heightened demand in the coming years, driven by its increasing application potential across various sectors such as F&B packaging, strapping, textile fiber, and more. Recycled PET, made ... Read More
-
2023 Global: Low Profile Additives Market - Innovative Markets Forecast (2029) report
... the period 2018 through 2029. Perry/Hope Partners' reports provide the most accurate industry forecasts based on our proprietary economic models. Our forecasts project the product market size nationally and by regions for 2018 to 2029 ... Read More
-
Construction Sealants Market by Resin Type (Silicone, Polyurethane, Polysulfide), Application (Glazing, Flooring & Joining, Sanitary & Kitchen), and Region (Asia-Pacific, Europe, North America, South America, Middle East & Africa) - Global Forecast to 2028
... construction sealants market is projected to grow from USD 4.7 billion in 2023 to USD 5.7 billion by 2028, at a CAGR of 3.6% between 2023 and 2028. The key factor driving the growth of ... Read More
-
Global Polypropylene Market: Analysis By Demand, By Production Capacity, By Type, By Industry, By Application, By Region, Size & Forecast with Impact Analysis of COVID-19 and Forecast up to 2028
... created by polymerizing propylene, is one of the most widely employed plastics globally (behind polypropylene), owing to its many highly advantageous characteristics that make it suitable for a wide range of applications. Since polypropylene is ... Read More
-
Barrier Films Market by Materials (Polyethylene (PE), Polypropylene (PP), Polyester (PET), Polyamide, Organic Coatings, Inorganic Oxide Coatings), Packaging Type (Pouches, Bags, Blister Packs), End-use, Type and Region - Global Forecast to 2028
... market size is estimated to be USD 34.1 billion in 2023, and it is projected to reach USD 45.1 billion by 2028 at a CAGR of 5.7%. Out of seven materials of barrier films (Polyethylene ... Read More
-
Automotive Carbon Thermoplastic Market based on by Raw Material (PAN-Based and PITCH-Based), Thermoplastic Resin [Polyether Ether Ketone (PEEK), Polyetherimide (PEI), polyaryletherketone (PAEK), and Others], Application (Aerospace & Defense, Automotive, Wind Turbines, Sports Equipment, Construction and Marine) and Region – Trends & Forecast: 2022–2030
... Marine) and Region – Trends & Forecast: 2022–2030 One of the key growth drivers for the carbon thermoplastic composites market is the expanding aerospace and defence sectors globally. Additionally, the International Civil Aviation Organisation wants ... Read More
-
High Temperature Thermoplastics Market , by End-use Industry (Transportation, Electrical & Electronics, Industrial, Medical), Resin Type (High Temperature FPs, HPPA, PPS, SP, LCP, AKP, PI), Temperature Range and Region – Trends & Forecast: 2022–2030
... temperature thermoplastics are now more frequently used in the medical sector because they can survive sterilisation methods like steam autoclaving and ethylene oxide. Material failure is a main or potential reason for between thirty and ... Read More
-
GFRP Composites Market based on By End-Use Industry (Transportation, Electrical & Electronics), Resin Type (Epoxy, Polyester, Vinyl Ester), Manufacturing Process (Compression & Injection Molding, RTM/VARTM, Layup,); By Region; Segment Forecast – Trends & Forecast: 2020–2030
... The market for composites is divided into thermoset and thermoplastic segments based on the kind of resin used. Because of thermoset composites' stiff interlinking molecular structure, inert chemical makeup, and resistance to ultraviolet and chemical ... Read More
-
Molding compound Market based on Resin Type (Phenolic, Epoxy, Polyester and Others), by Applications (Electricals, Aerospace, Automotive and Others), and by Region – Trends & Forecast: 2022–2030
... area, application, and kind of resin. The market is divided into phenolic, epoxy, polyester, and other categories based on the type of resin used. The market is segmented into electrical and electronics, aerospace, automotive, and ... Read More
-
Thermoset Composites Market based on Manufacturing Process (Lay-Up, Filament Winding, Injection Molding, Pultrusion), Fiber Type (Glass, Carbon), Resin Type (Polyester, Epoxy, Vinyl Ester), End-Use Industry, and Region – Trends & Forecast – 2015-2020
... for thermoset composites is expected to grow significantly during the coming few years. Usually made from carbon, aramid, or glass fibres, these goods are added to resins like vinyl esters, polyesters, phenolics, or epoxies. Thermosets ... Read More
-
Battery Separators Market,by Battery Type (Li-Ion, Lead Acid, Others), Material Type (Polypropylene, Polyethylene, Others), End User (Automotive, Industrial, Consumer Electronics, Others) and Region – Global Forecast up to 2030
... demand worldwide as a result of their widespread popularity. However, the main market for lithium-ion batteries is the consumer electronics industry. Additionally, sales of electric vehicles (EVs) have surged, and in recent years, they have ... Read More
-
Thermoplastic Tapes Market by Fiber Type (Glass, Carbon), Resin Type (PAEK, PA, PPS, PP), Application (Aerospace & Defense, Automotive & Transportation, Oil & Gas, Sporting Goods, Medical & Healthcare), and Region - Global Forecasts to 2028
... 2028 The thermoplastic tapes market is projected to grow from USD 2.7 billion in 2023 to USD 4.4 billion by 2028, at a CAGR of 10.5% during the forecast period. Carbon fibers are used in ... Read More
-
Global Roofing Chemicals Market Size study & Forecast, by Product (Bituminous, Styrene, Epoxy Resin, Acrylic Resin, Elastomers, Other Products), by End-User (Residential, Commercial, Other End-User Industries), and Regional Analysis, 2023-2030
... valued approximately at USD XX billion in 2022 and is anticipated to grow with a healthy growth rate of more than 4% over the forecast period 2023-2030. Roofing chemicals are substances and materials used in ... Read More
-
Greenhouse Film Market by Thickness (80 to 150 microns, 150 to 200 microns and More than 200 microns), Resin Type (LDPE, LLDPE, EVA and Others), Application (Flowers and Ornamentals, Vegetables and Fruits), and Geography (North America, Europe, APAC, and RoW) - Forecast to 2028
... America, Europe, APAC, and RoW) - Forecast to 2028 Greenhouse films are useful in shelter the plants which are grown in a greenhouse in order to maximize the exposure of sun light and to reduce ... Read More
-
Hybrid Composites Market Forecast to 2028 - Global Analysis by Fiber Type [Carbon/Aramid, Carbon/Glass, High-Modulus Polypropylene (HMPP)/Carbon, Ultra High Molecular Weight Polyethylene (UHMWPE)/Carbon, and Others], Resin (Thermoset and Thermoplastic), Application (Automotive, Aerospace, Marine, Wind Energy, Sporting Goods, and Others), and Geography
... Sporting Goods, and Others), and Geography The hybrid composites market is expected to grow from US$ 856.02 million in 2022 to US$ 1,678.47 million by 2028; it is estimated to register a CAGR of 12.1% ... Read More
-
Global Automobile Friction Materials Supply, Demand and Key Producers, 2023-2029
... the forecast period (2023-2029). The automobile brake friction items include a disc brake, brake shoes, drum brake, brake pad, and liner, all of which are intended to slow down a vehicle. This report studies the ... Read More