Global Magnetic Particle Market 2024 by Manufacturers, Regions, Type and Application, Forecast to 2030

Global Magnetic Particle Market 2024 by Manufacturers, Regions, Type and Application, Forecast to 2030

Ferrites

Commonly known as Ceramics, have been in production since the 1950"s.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.



Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.



Alnico

These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.



AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.



Samarium Cobalt

They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.



SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.



Neodymium(NdFeB)

Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide.



Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.



Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.

Ferrites

Commonly known as Ceramics, have been in production since the 1950"s.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.



Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.



Alnico

These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.



AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.



Samarium Cobalt

They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.



SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.



Neodymium(NdFeB)

Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide.



Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.



Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.

According to our (Global Info Research) latest study, the global Magnetic Particle market size was valued at US$ 1643 million in 2023 and is forecast to a readjusted size of USD 2006 million by 2030 with a CAGR of 2.9% during review period.

Global NdFeB Magnetic Particle key players include MQI, Zhao Ri Ke, Galaxy Magnets, Aichi Steel, Yuhong, etc. Global top five manufacturers hold a share over 80%.

China is the largest market, followed by Japan.

This report is a detailed and comprehensive analysis for global Magnetic Particle market. Both quantitative and qualitative analyses are presented by manufacturers, by region & country, by Type and by Application. As the market is constantly changing, this report explores the competition, supply and demand trends, as well as key factors that contribute to its changing demands across many markets. Company profiles and product examples of selected competitors, along with market share estimates of some of the selected leaders for the year 2024, are provided.

Key Features:

Global Magnetic Particle market size and forecasts, in consumption value ($ Million), sales quantity (K MT), and average selling prices (USD/MT), 2019-2030

Global Magnetic Particle market size and forecasts by region and country, in consumption value ($ Million), sales quantity (K MT), and average selling prices (USD/MT), 2019-2030

Global Magnetic Particle market size and forecasts, by Type and by Application, in consumption value ($ Million), sales quantity (K MT), and average selling prices (USD/MT), 2019-2030

Global Magnetic Particle market shares of main players, shipments in revenue ($ Million), sales quantity (K MT), and ASP (USD/MT), 2019-2024

The Primary Objectives in This Report Are:

To determine the size of the total market opportunity of global and key countries

To assess the growth potential for Magnetic Particle

To forecast future growth in each product and end-use market

To assess competitive factors affecting the marketplace

This report profiles key players in the global Magnetic Particle market based on the following parameters - company overview, sales quantity, revenue, price, gross margin, product portfolio, geographical presence, and key developments. Key companies covered as a part of this study include MQI, Aichi Steel, Zhao Ri Ke, Galaxy Magnets, Yuhong, Huiling, Western Magnet, San Huan, Hoosier Magnetics, Todakogyo, etc.

This report also provides key insights about market drivers, restraints, opportunities, new product launches or approvals.

Market Segmentation

Magnetic Particle market is split by Type and by Application. For the period 2019-2030, the growth among segments provides accurate calculations and forecasts for consumption value by Type, and by Application in terms of volume and value. This analysis can help you expand your business by targeting qualified niche markets.

Market segment by Type
Ferrites
NdFeB

Market segment by Application
Auto
Household Appliance
Computer
Electronic Toys
Electroacoustic Product
Military

Major players covered
MQI
Aichi Steel
Zhao Ri Ke
Galaxy Magnets
Yuhong
Huiling
Western Magnet
San Huan
Hoosier Magnetics
Todakogyo
HIMAG
DMEGC Magnetics
Zhejiang Ante
Maanshan CY
BGRIMM Magnetic
Shunde Baling
MGC
Comc Technology

Market segment by region, regional analysis covers

North America (United States, Canada, and Mexico)

Europe (Germany, France, United Kingdom, Russia, Italy, and Rest of Europe)

Asia-Pacific (China, Japan, Korea, India, Southeast Asia, and Australia)

South America (Brazil, Argentina, Colombia, and Rest of South America)

Middle East & Africa (Saudi Arabia, UAE, Egypt, South Africa, and Rest of Middle East & Africa)

The content of the study subjects, includes a total of 15 chapters:

Chapter 1, to describe Magnetic Particle product scope, market overview, market estimation caveats and base year.

Chapter 2, to profile the top manufacturers of Magnetic Particle, with price, sales quantity, revenue, and global market share of Magnetic Particle from 2019 to 2024.

Chapter 3, the Magnetic Particle competitive situation, sales quantity, revenue, and global market share of top manufacturers are analyzed emphatically by landscape contrast.

Chapter 4, the Magnetic Particle breakdown data are shown at the regional level, to show the sales quantity, consumption value, and growth by regions, from 2019 to 2030.

Chapter 5 and 6, to segment the sales by Type and by Application, with sales market share and growth rate by Type, by Application, from 2019 to 2030.

Chapter 7, 8, 9, 10 and 11, to break the sales data at the country level, with sales quantity, consumption value, and market share for key countries in the world, from 2019 to 2024.and Magnetic Particle market forecast, by regions, by Type, and by Application, with sales and revenue, from 2025 to 2030.

Chapter 12, market dynamics, drivers, restraints, trends, and Porters Five Forces analysis.

Chapter 13, the key raw materials and key suppliers, and industry chain of Magnetic Particle.

Chapter 14 and 15, to describe Magnetic Particle sales channel, distributors, customers, research findings and conclusion.