Germany Dental CAD-CAM Market Analysis and Forecast to 2032: By Type (In-lab System, In-office System), Component (Hardware, Software), and End-use (Dental Clinics, Dental Laboratories, Dental Milling Center)

Germany Dental CAD-CAM Market Analysis and Forecast to 2032: By Type (In-lab System, In-office System), Component (Hardware, Software), and End-use (Dental Clinics, Dental Laboratories, Dental Milling Center)

The Germany Dental CAD-CAM Market size was USD 98.6 million in 2022 and is anticipated to reach USD 281.7 million by 2032, growing at a rate of 11.1% from 2023 to 2032.

CAD/CAM dentistry" refers to the software enabling dental practitioners to do complicated restorations more quickly, effectively, and occasionally even more precisely. Professionals conducting complex dental operations benefit from using software programs called computer-aided design (CAD) and computer-aided manufacturing (CAM). Restorations made of high-strength ceramic, such as crowns, inlays, onlays, veneers, bridges, dentures, and implant-supported restorations, are created by dental practices and laboratories using CAD/CAM technology.
Global Germany Dental CAD-CAM Market Scope and Report Structure
[table id=855 /]
Market Trends and Drivers
Rising prevalence of dental disorders

The rising incidence of dental infections and other periodontal diseases, the demand for dental care facilities, dental surgical procedures, and dental care staff, as well as technical improvements, all contribute to an increase in these conditions, which are some of the major factors propelling the growth of this market. Moreover, due to the growing aging population, there has been an increase in dental implants and oral surgeries being performed. According to the Germany Federal Statistical Office 2022 report, there are roughly 83.2 million people in Germany. Of these, 16.2 million people are over 67 years old, and this is expected to rise to 21.4 million by 2040. In addition, oral cavities are being impacted by a decline in manual dexterity, an increase in co-morbidity, and medication use. Hence, dental care in aged care facilities is found to be poor, and access to dental professionals is difficult. There are several other risk factors, such as smoking, poor oral hygiene, diabetes, medication, and hereditary conditions, which increase dental diseases.
Market Restraints and Challenges
High cost of dental CAD CAM system in Germany

The high cost of dental CAD CAM (Computer-Aided Design/Computer-Aided Manufacturing) systems in Germany is restraints the market growth. For instance, according to an article published by All3DP, the average selling price of a complete CAD/CAM system ranges in between USD 90,000.0 to USD 112,000.0 including cost of scanner, milling machine, and associated software.Dental CAD CAM systems are advanced technological solutions that allow for precise and efficient fabrication of dental prosthetics, such as crowns, bridges, and implants. However, these systems often come with substantial price tags, making them unaffordable for many dental practices, especially smaller ones or those in rural areas. The high initial investment required to purchase and set up a dental CAD CAM system, along with the ongoing maintenance costs, can be prohibitive for dentists and dental laboratories, limiting their ability to adopt this technology.

Moreover, the high cost of dental CAD CAM systems can also impact patients' access to quality dental care. As dental practices bear the burden of the expensive equipment, they may pass on the costs to patients through higher prices for dental treatments involving CAD CAM restorations. This can make dental services less affordable for individuals, potentially leading to delayed or inadequate treatment, limiting the overall adoption and utilization of these systems in the dental industry.
Global Germany Dental CAD-CAM Market Segmental Overview


The report analyses the global Germany Dental CAD-CAM Market based on type, component, end-user, and region.

Global Germany Dental CAD-CAM Market by Type



By Type, the Dental CAD/CAM market is segmented into In-lab Systems and In-office Systems. The In-lab Systems segment is anticipated to dominate the market during the forecast period. The segment was valued at USD 69.0 Million in 2017, and it is anticipated to grow further to USD 181.0 million by 2032, at a CAGR of 7.7% during the forecast period. Likewise, the In-office Systems segment is likely to witness the fastest growth during the forecast period by growing at a CAGR of 9.5% during the forecast period. The segment was valued at USD 29.6 million in 2017 and it is anticipated to grow further to USD 100.7 Million by 2032. The increasing number of dentists and dentistry offices in Germany is anticipated to enhance the market growth. For instance. In 2019, there were 98,604 registered dentists in Germany, of whom 72,589 were actively practicing. To practice, dentists must be accredited by the National Dental Association of Statutory Health Insurance (Kassenzahnärztliche Bundesvereinigung (KZBV)) and meet strict criteria. In fact, around 400 independent dental practices treat only privately insured patients in the country.

Moreover, the increasing demand for chairside systems will boost product use. Chairside CAD/CAM systems include a scanner and a milling device. The conventional impression is replaced by a digital optical impression, and in most cases, the prosthetic restoration is manufactured on the spot, which is a major time-saving advantage. This system provides unique benefits such as better patient comfort, reduce procedure time along with improved quality. they also offer competitive advantages to dentists by helping them provide digital service at a faster pace. Thus more dentists are adopting in-office or chairside systems, propelling the dental CAD/CAM industry growth in Germany.

Global Germany Dental CAD-CAM Market by Component



By component, the market is divided into hardware and software. The hardware segment is anticipated to dominate the market during the forecast period. Likewise, the software segment is anticipated to witness the fastest growth during the forecast period.

Hardware includes equipment such as milling machine, intraoral scanners, extra oral scanners, and many others. Rise in demand for intraoral scanners play a significant role as Intraoral scanners are commonly used in dentistry to capture direct optical imprints. To acquire high-speed imprints of teeth, most dentists employ cutting-edge intraoral scanners. Many makers of dental CAD/CAM systems are turning to an open design so that the software may be compatible with any milling device. Intraoral scanners and CAD improvements ensure patient safety while also enhancing patient results. These scanners' accuracy, speed, and comfort for patients are all improving in order to serve a broader patient populated countries like Germany.

Additionally, the increase in demand for digital dentistry in Germany is one of the reasons to fuel the growth of the market. CAD/CAM technologies enable digital veneering workflow and automate the manufacture and quality standardization of dental restorations. As there are more active cases of dental caries and concerns of oral health can propel market’s growth in German region.

Global Germany Dental CAD-CAM Market by End-user



By end-use, the Germany dental CAD-CAM market has been segmented into dental clinics, dental laboratories, and dental milling centers. The dental clinics segment is anticipated to dominate the market during the forecast period. Besides, the dental milling centers segment is likely to witness the fastest growth during the forecast period. Overall, CAD/CAM technology may assist dental clinics in treating patients more effectively, precisely, and affordably while enhancing the patient experience. Due to the excellent accuracy of CAD/CAM technologies, restorations fit better and clinical results are enhanced. Dental clinics may treat patients more quickly by using CAD/CAM technologies, which can drastically reduce the time needed to design and construct restorations. Restorations that are extremely accurate and complicated can be made with CAD/CAM technology, which may not be achievable with conventional methods. CAD/CAM systems can be a cost-effective option for dental clinics by minimizing the need for human labor and several sessions.

The patient experience can be enhanced using CAD/CAM technology to eliminate the requirement for dirty and unpleasant impression materials. With enhanced communication between the dentist clinic made possible by CAD/CAM technology, restoration turnaround times might be sped up. Highly customized restorations that match each patient’s unique demands can be made using CAD/CAM technologies. Therefore, the dental clinics segment has a significant market share.
Major Players in the Global Germany Dental CAD-CAM Market
The key players in the Germany Dental CAD-CAM Market are Align Technology, Inc. (exocad GmbH), Ardian (imes-icore GmbH), Argen Dental GmbH, CADdent GmbH (DeguDent GmbH), Dentsply Sirona (Sirona Dental Systems, Inc.), INFINIDENT Solutions GmbH, Ivoclar Vivadent, Henry Schein, Inc. (BioHorizons, Inc.), Zimmer Biomet, Zirkonzahn srl., and 3M Company, among others.
COVID-19 Impact:
COVID-19 has negatively impacted the Germany dental industry, because of the decrease in patient visits to dental professionals to limit the transmission of the COVID-19 virus. Furthermore, a significant number of elective surgical operations involving dental restorations have been postponed, limiting demand for CAD/CAM systems. Key market participants have reported a decline in income due to fewer sales of goods and delayed completion of dental laboratory renovations. Moreover, according to Dentsply Sirona's Quarterly Update from mid-March, the COVID-19 outbreak disrupted the market conditions for both dental practitioners and their patients. According to insights10, Germany's healthcare spending has hit a new peak of $468.91 billion. In 2020, healthcare accounted for 13.1% of the country's GDP (GDP). This proportion climbed by 1.2% points year on year.
Recent Developments:

In December 20222, Mindray introduces new wearable patient monitoring system, refining clinicia workflow to track patient conditions. “mWearTM” supports comprehensive and precise measurements of patient status, integrating 6 key vital signs powered by Anti-motion Algorithm, specialized health parameters, status indicators and time analysis. mWearTM features two monitoring modes, Wearable Mode and Continuous Mode, for caregivers to get patient status updates accordingly to the customize setting, and intelligently triggers emergencies and alarm escalations to ensure timely response to patient deterioration.
In September 2022, Apple introduced Apple Watch Series 8 and the new Apple Watch SE, which bring ground breaking technology and performance, and important safety innovations to the two best-selling smartwatches. The new Apple Watch SE delivers the core Apple Watch experience, including Activity tracking, high and low heart rate notifications, and Emergency SOS, as well as the new Crash Detection feature.
In August 2022, Medtronic plc announced the completion of its acquisition of Affera, Inc. This purchase broadens the company's cardiac ablation offering by adding its inaugural cardiac mapping and navigation platform, which includes a distinct, fully integrated diagnostic, focused pulsed field, and radiofrequency ablation solution

Germany Dental CAD-CAM Market Report Coverage

The report offers a comprehensive quantitative as well as qualitative analysis of the current Germany Dental CAD-CAM Market outlook and estimations from 2022 to 2032, which helps to recognize the prevalent opportunities.
 The report also covers qualitative as well as quantitative analysis of Germany Dental CAD-CAM Market in terms of revenue ($Million)
 Major players in the market are profiled in this report and their key developmental strategies are studied in detail. This will provide an insight into the competitive landscape of the Germany Dental CAD-CAM Market Report Coverage  industry.
 A thorough analysis of market trends and restraints is provided.
By region as well as country market analysis is also presented in this report.
 Analytical depiction of the Germany Dental CAD-CAM Market along with the current trends and future estimations to depict imminent investment pockets. The overall Germany Dental CAD-CAM Market Report Coverage industry opportunity is examined by understanding profitable trends to gain a stronger foothold.
 Porter’s five forces analysis, SWOT analysis, COVID-19 impact analysis, Russia-Ukraine war impact, and PESTLE analysis of the Germany Dental CAD-CAM Market are also analyzed.

Frequently Asked Questions
Q1. How big is the Germany Dental CAD-CAM Market?

Ans. The Germany Dental CAD-CAM Market size was USD 98.6 billion in 2022 and is anticipated to reach USD 281.7 billion by 2032, growing at a rate of 11.1% from 2023 to 2032.

Q2. What is the Germany Dental CAD-CAM Market growth rate?

Ans. The growth rate of the Germany Dental CAD-CAM Market is 11.1%

Q3. Which segment holds a major market share for the market?

Ans. In-lab Systems holds a major market share of the Germany Dental CAD-CAM Market in 2022.

Q4. Which segment accounted for the largest Germany Dental CAD-CAM Market share?

Ans. By application, segment accounted for the largest Germany Dental CAD-CAM Market share.

Q5. Who are the key players in the kidney stones management market?

Ans. The global Germany Dental CAD-CAM Market report includes players such Align Technology, Inc. (exocad GmbH), Ardian (imes-icore GmbH), Argen Dental GmbH, CADdent GmbH (DeguDent GmbH), Dentsply Sirona (Sirona Dental Systems, Inc.), INFINIDENT Solutions GmbH, Ivoclar Vivadent, Henry Schein, Inc. (BioHorizons, Inc.), Zirkonzahn srl., Zimmer Biomet, and 3M Company. among others.

Q6. What are the factors driving the Germany Dental CAD-CAM Market growth?

Ans. The major factors driving the growth of the market are increasing adoption of chairside CAD/CAM systems.

Q7. What are the key growth strategies of Germany Dental CAD-CAM Market players?

Ans. The key growth strategies of Germany Dental CAD-CAM Market players are product launch and product approval.

*Please Note: The report will be delivered in 3-4 business days upon order confirmation*