Global Magnetic Particle Market Research Report 2023(Status and Outlook)

Global Magnetic Particle Market Research Report 2023(Status and Outlook)

Report Overview

Ferrites

Commonly known as Ceramics, have been in production since the 1950's.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.

Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.

Alnico

These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.

AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.

Samarium Cobalt

They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.

SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.

Neodymium(NdFeB)

Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide.

Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.

Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.

Ferrites

Commonly known as Ceramics, have been in production since the 1950's.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.

Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.

Alnico

These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.

AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.

Samarium Cobalt

They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.

SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.

Neodymium(NdFeB)

Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide.

Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.

Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.

The Global Magnetic Particle Market Size was estimated at USD 1596.30 million in 2022 and is projected to reach USD 1963.25 million by 2029, exhibiting a CAGR of 3.00% during the forecast period.

Bosson Research’s latest report provides a deep insight into the global Magnetic Particle market covering all its essential aspects. This ranges from a macro overview of the market to micro details of the market size, competitive landscape, development trend, niche market, key market drivers and challenges, SWOT analysis, Porter’s five forces analysis, value chain analysis, etc.

The analysis helps the reader to shape the competition within the industries and strategies for the competitive environment to enhance the potential profit. Furthermore, it provides a simple framework for evaluating and accessing the position of the business organization. The report structure also focuses on the competitive landscape of the Global Magnetic Particle Market, this report introduces in detail the market share, market performance, product situation, operation situation, etc. of the main players, which helps the readers in the industry to identify the main competitors and deeply understand the competition pattern of the market.

In a word, this report is a must-read for industry players, investors, researchers, consultants, business strategists, and all those who have any kind of stake or are planning to foray into the Magnetic Particle market in any manner.

Global Magnetic Particle Market: Market Segmentation Analysis

The research report includes specific segments by region (country), manufacturers, Type, and Application. Market segmentation creates subsets of a market based on product type, end-user or application, Geographic, and other factors. By understanding the market segments, the decision-maker can leverage this targeting in the product, sales, and marketing strategies. Market segments can power your product development cycles by informing how you create product offerings for different segments.

Key Company

MQI

Aichi Steel

Zhao Ri Ke

Galaxy Magnets

Yuhong

Huiling

Western Magnet

San Huan

Hoosier Magnetics

Todakogyo

HIMAG

DMEGC Magnetics

Zhejiang Ante

Maanshan CY

BGRIMM Magnetic

Shunde Baling

MGC

Comc Technology

Market Segmentation (by Type)

Ferrites

NdFeB

Market Segmentation (by Application)

Construction Industry

Manufacturing & Industry

Electric Power Industry

Service Industry

Other

Geographic Segmentation

North America (USA, Canada, Mexico)

Europe (Germany, UK, France, Russia, Italy, Rest of Europe)

Asia-Pacific (China, Japan, South Korea, India, Southeast Asia, Rest of Asia-Pacific)

South America (Brazil, Argentina, Columbia, Rest of South America)

The Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria, South Africa, Rest of MEA)

Key Benefits of This Market Research:

Industry drivers, restraints, and opportunities covered in the study

Neutral perspective on the market performance

Recent industry trends and developments

Competitive landscape & strategies of key players

Potential & niche segments and regions exhibiting promising growth covered

Historical, current, and projected market size, in terms of value

In-depth analysis of the Magnetic Particle Market

Overview of the regional outlook of the Magnetic Particle Market:

Key Reasons to Buy this Report:

Access to date statistics compiled by our researchers. These provide you with historical and forecast data, which is analyzed to tell you why your market is set to change

This enables you to anticipate market changes to remain ahead of your competitors