India Automotive Engine Components Market Overview, 2029
India's auto area remains as a signal of development and innovation, energized by a blossoming economy and a quickly growing working class. At the core of this flourishing auto biological system lies the motor parts market, a significant portion driving the presentation, productivity, and supportability of vehicles the nation over. As India arises as a worldwide auto center, the motor parts market becomes the dominant focal point, displaying a mix of mechanical ability, market dynamism, and vital collaborations. India's auto motor parts market is a lively scene described by vigorous interest, innovative progressions, and different market players. Motor parts act as the foundation of vehicles, including a wide exhibit of parts, for example, cylinders, chamber heads, driving rods, camshafts, fuel infusion frameworks, turbochargers, exhaust frameworks, and cooling frameworks. With a flourishing car fabricating area and a quickly extending vehicle parc, the interest for motor parts in India stays solid, upheld by both homegrown creation and imports. The Indian car motor parts market brags a different biological system makers, providers, and post-retail players. Homegrown goliaths, for example, Bharat Produce, Mahle, and Bosch India assume a huge part in providing motor parts to OEMs and secondary selling channels. Moreover, worldwide players like Denso, Delphi Innovations, and BorgWarner have serious areas of strength for a, utilizing their worldwide mastery and advances to take care of the Indian market. Cooperation among homegrown and global players cultivates growth, improves item quality, and drives market. Technological advancement is at the bleeding edge of India's auto motor parts market, driving progressions in execution, proficiency, and outflows control. With an emphasis on fulfilling severe administrative guidelines and purchaser assumptions, makers put resources into innovative work to foster state of the art advances. This incorporates the reception of turbocharging, direct infusion frameworks, variable valve timing, and lightweight materials to further develop motor productivity and decrease outflows. Additionally, the shift towards charge is reshaping the market scene, with interests in electric vehicle (EV) parts like electric engines, batteries, and power electronics. The auto motor parts market in India faces the two difficulties and open doors on its way to development. While quick urbanization, rising wages, and government drives drive interest for vehicles and motor parts, difficulties, for example, foundation imperatives, inventory network disturbances, and administrative vulnerabilities present obstacles. Nonetheless, these difficulties additionally present open doors for advancement, limitation, and market extension. By embracing supportable works on, encouraging ability improvement, and utilizing digitalization, organizations can open new roads for development and seriousness in the Indian market.
According to the research report, ""India Automotive Engine Components Market Overview, 2029,"" published by Bonafide Research, the India Automotive Engine Components market is anticipated to add to more than USD 5.23 Billion by 2024–29. The Indian government has implemented several initiatives to support the automotive industry, including the Automotive Mission Plan (AMP) and the Faster Adoption and Manufacturing of Hybrid and Electric Vehicles (FAME) scheme. These initiatives provide incentives for the manufacture and adoption of electric vehicles, as well as investments in research and development, infrastructure development, and skill enhancement. Continuous advancements in automotive technology, including engine design, materials, and manufacturing processes, are driving demand for advanced engine components. Manufacturers are investing in research and development to develop innovative solutions that improve engine performance, efficiency, and emissions control, thereby meeting evolving consumer preferences and regulatory requirements. India's automotive industry is increasingly looking to export markets to expand its presence globally. Engine component manufacturers can leverage India's manufacturing capabilities, cost competitiveness, and skilled workforce to supply engine components to international markets, thereby increasing revenue and market share. The implementation of BS-VI emissions standards in India has accelerated the adoption of cleaner and more fuel-efficient engine technologies. Engine component manufacturers are innovating to develop BS-VI compliant components such as fuel injection systems, particulate filters, and advanced exhaust aftertreatment systems. Engine component manufacturers are focusing on developing solutions such as catalytic converters, exhaust gas recirculation (EGR) systems, and selective catalytic reduction (SCR) systems to meet increasingly stringent emissions standards. The automotive industry in India is witnessing the rise of connected and autonomous vehicles (CAVs), which rely on advanced engine components and technologies. Engine components such as sensors, actuators, and electronic control units (ECUs) are integral to the operation of CAVs, enabling features such as advanced driver assistance systems (ADAS) and autonomous driving capabilities.
Engine downsizing is gaining traction in the Indian passenger vehicle market as manufacturers strive to meet fuel efficiency standards and emission norms. Engine component manufacturers are innovating to develop lightweight and compact components that optimize the performance of smaller engines without compromising power output. This trend is driving the demand for advanced turbocharging systems, high-pressure fuel injection systems, and lightweight materials in engine components. With the implementation of stringent emission regulations such as Bharat Stage VI (BS-VI), engine component manufacturers are focusing on developing components that comply with these standards. Advanced technologies such as exhaust gas recirculation (EGR), selective catalytic reduction (SCR), and diesel particulate filters (DPF) are being integrated into engine components to reduce emissions and meet regulatory. LCVs play a crucial role in providing last-mile connectivity in India's transportation ecosystem, particularly in rural and semi-urban areas. Engine component manufacturers are collaborating with technology providers to develop components that support connectivity features such as remote diagnostics, predictive maintenance, and real-time monitoring. Engine component manufacturers are investing in research and development to enhance the durability and reliability of components such as pistons, bearings, and valve trains to withstand the rigors of commercial use. This focus on durability and reliability is essential for minimizing downtime, reducing maintenance costs, and maximizing the lifespan of LCVs in the Indian market. Engine component manufacturers are catering to this trend by developing high-performance components such as performance camshafts, high-flow air filters, and upgraded exhaust systems that enhance the power output and responsiveness of two-wheeled vehicles. This shift towards performance-oriented two-wheelers is driving demand for aftermarket engine components that allow enthusiasts to customize and upgrade their vehicles for improved performance. With tightening emission regulations and growing environmental concerns, there is a growing adoption of advanced fuel injection systems in two-wheeled vehicles in India. Engine component manufacturers are developing fuel injection systems with features such as electronic fuel injection (EFI), variable valve timing (VVT), and port fuel injection (PFI) to optimize fuel delivery, improve combustion efficiency, and reduce emissions.
Gasoline engines in India may feature dual-VVT systems, which independently control the timing of both the intake and exhaust valves. Dual-VVT technology optimizes engine performance, improves fuel efficiency, and reduces emissions by adjusting valve timing based on engine load and speed. Turbocharging is gaining popularity in gasoline vehicles in India, especially in compact and mid-sized cars. Turbocharged engines use exhaust gases to drive a turbine that compresses intake air, resulting in increased power output and improved fuel efficiency without sacrificing engine displacement. Gasoline direct injection technology continues to evolve in India, with advancements in injector design, fuel delivery strategies, and combustion chamber geometry. GDI systems enhance fuel atomization, combustion efficiency, and engine performance by precisely controlling fuel delivery directly into the combustion chamber. Diesel engines in India may incorporate advanced turbocharger technologies such as variable geometry turbochargers (VGT) and twin-scroll turbochargers. These technologies optimize boost pressure delivery, improve engine response, and enhance fuel efficiency across a wide range of operating conditions. To meet Bharat Stage VI (BS-VI) emissions standards, diesel vehicles in India utilize SCR systems with AdBlue injection to reduce nitrogen oxide (NOx) emissions. SCR technology converts NOx into harmless nitrogen and water vapor, improving air quality and compliance with emissions regulations. Modern diesel engines feature HPCR fuel systems that deliver fuel to the injectors at extremely high pressures for precise fuel metering and combustion control. HPCR technology enhances engine performance, fuel efficiency, and emissions reduction in diesel vehicles. EV owners in India are increasingly investing in home charging solutions to recharge their vehicles conveniently. Home charging stations, equipped with Level 2 chargers, allow EV owners to recharge their vehicles overnight, minimizing reliance on public charging infrastructure and reducing charging costs. With the growing adoption of EVs, there is a focus on battery recycling initiatives in India to manage end-of-life EV batteries effectively. Battery recycling facilities extract valuable materials such as lithium, cobalt, and nickel from spent EV batteries, reducing environmental impact and promoting sustainable resource management. EV manufacturers in India are developing advanced battery thermal management systems to optimize battery performance and longevity. Active thermal management systems regulate battery temperature by circulating coolant or using air conditioning systems, ensuring optimal battery health and reliability in diverse climatic conditions.
The market for engine components for internal combustion engines in India is driven by the country's robust automotive manufacturing sector and the continued demand for ICE-powered vehicles. With a diverse vehicle parc consisting of gasoline, diesel, and compressed natural gas (CNG) vehicles, engine component manufacturers cater to various engine types and fuel options prevalent in the Indian market. Engine components for internal combustion engines in India often undergo specific adaptations to suit the country's unique operating conditions. These adaptations may include modifications to enhance durability in high-temperature environments, improve fuel efficiency for stop-and-go traffic prevalent in urban areas, and optimize performance for variable fuel quality encountered in different regions of the country. Electric engines, also known as electric motors, are an emerging propulsion technology in the Indian automotive industry, primarily used in electric vehicles (EVs) and hybrid electric vehicles (HEVs). Engine components for electric vehicles include the electric motor itself, power electronics for controlling motor operation, battery packs for storing energy, inverters for converting DC power to AC power, and charging systems for replenishing battery charge.The market for engine components for electric vehicles is experiencing rapid growth in India, driven by government incentives, environmental regulations, and consumer preferences for clean and sustainable transportation solutions. With the Indian government's ambitious targets for electric vehicle adoption, engine component manufacturers are witnessing increasing demand for electric motors, batteries, and associated components to support the electrification of the automotive fleet.
Considered in this report
• Historic year: 2018
• Base year: 2023
• Estimated year: 2024
• Forecast year: 2029
Aspects covered in this report
• Automotive Engine Components market Outlook with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation
By Engine components type
• Connecting rod
• Cylinder Head
• Flywheel
• Valves
• Pistons
• Engine Block
• Others
By Vehicle type
• Passenger Vehicles
• LCVs
• Two Wheelers
By Fuel type
• Gasoline
• Diesel
• Electric vehicles.
By Sales Channel
• OEM
• After Market
By Engine Type
• internal combustion engines (ICE)
• Electric engines.
The approach of the report:This report consists of a combined approach of primary and secondary research. Initially, secondary research was used to get an understanding of the market and list the companies that are present in it. The secondary research consists of third-party sources such as press releases, annual reports of companies, and government-generated reports and databases. After gathering the data from secondary sources, primary research was conducted by conducting telephone interviews with the leading players about how the market is functioning and then conducting trade calls with dealers and distributors of the market. Post this; we have started making primary calls to consumers by equally segmenting them in regional aspects, tier aspects, age group, and gender. Once we have primary data with us, we can start verifying the details obtained from secondary sources.
Intended audienceThis report can be useful to industry consultants, manufacturers, suppliers, associations, and organizations related to the Automotive Engine Components industry, government bodies, and other stakeholders to align their market-centric strategies. In addition to marketing and presentations, it will also increase competitive knowledge about the industry.