Global Hydraulic Fracturing Market Outlook, 2029
Hydraulic fracturing, commonly known as fracking, is a well-stimulation technique used to maximize the extraction of natural gas, petroleum, and other subterranean resources. The process involves the creation of fractures in rocks and rock formations by injecting fluid into cracks to force them open. This technique has revolutionized the energy industry, making it possible to access and extract previously unreachable resources. However, it has also sparked significant controversy due to its potential environmental impacts. The fracking process begins with the drilling of a wellbore into the reservoir rock formation. A mixture of water, sand, and chemicals is then injected at high pressure into the wellbore. The pressure causes the rock to fracture, creating fissures through which oil or gas can flow more freely. The sand or other proppant material helps to keep these fractures open, allowing the hydrocarbons to be extracted. Hydraulic fracturing has significantly increased the production of oil and natural gas in the United States and other countries. It has led to a decrease in energy prices, increased energy security, and created jobs in the energy sector. Furthermore, the increased availability of natural gas has led to a shift away from coal for power generation, resulting in lower emissions of greenhouse gases and other pollutants. Despite its benefits, hydraulic fracturing has raised several environmental concerns. One of the primary concerns is the potential contamination of groundwater. The fracking fluid contains a variety of chemicals, some of which are toxic, and there is a risk that these could migrate into groundwater supplies. Additionally, the disposal of wastewater from fracking operations has been linked to increased seismic activity. Another concern is the large amount of water used in the fracking process. In areas where water is scarce, this can put a strain on local resources. There are also concerns about air pollution from fracking operations, including the release of methane, a potent greenhouse gas. Due to these environmental concerns, hydraulic fracturing is heavily regulated in many countries. Regulations typically address issues such as well construction, wastewater disposal, and air emissions. Some places have even banned fracking altogether. The future of hydraulic fracturing will likely depend on the development of technologies to mitigate its environmental impacts, the implementation of effective regulations, and the evolution of energy markets. As the world moves towards a more sustainable energy future, the role of hydraulic fracturing in meeting energy needs will continue to be a topic of debate. Natural gas, which is abundant in shale formations, is considered a cleaner alternative to coal. The shift from coal to natural gas for electricity generation has contributed to a reduction in greenhouse gas emissions, aligning with global efforts to combat climate change. This transition is supported by policies and incentives aimed at promoting cleaner energy sources, thereby bolstering the demand for natural gas extracted through fracking.
According to the research report, “Global Hydraulic Fracturing Market Outlook, 2029” published by Bonafide Research, the market is anticipated to cross USD 75 Billion by 2029, increasing from USD 52.86 Billion in 2023. The market is expected to grow with 7.20% CAGR by 2024-29. The hydraulic fracturing market is experiencing robust growth due to a confluence of factors that address both global energy demands and economic considerations. At the forefront is the escalating global demand for energy, particularly in emerging economies such as China and India, where industrialization and urbanization are driving unprecedented energy consumption. As conventional oil and gas fields mature and their production declines, hydraulic fracturing offers a viable solution to tap into vast reserves of hydrocarbons trapped in shale formations, which were previously deemed uneconomical to exploit. Technological advancements have played a crucial role in propelling the market forward. Innovations in drilling techniques, such as horizontal drilling combined with fracking, have significantly improved the efficiency and cost-effectiveness of extraction processes. These advancements have lowered the breakeven costs for shale oil and gas, making it competitive with conventional extraction methods. As a result, regions with abundant shale formations, like the United States, have witnessed a dramatic increase in domestic oil and gas production. This surge in production has not only enhanced energy security by reducing reliance on foreign oil imports but also positioned the U.S. as a leading exporter of natural gas. In the United States, the Environmental Protection Agency (EPA) oversees certain aspects of fracking under the Clean Water Act, while states have their own regulations and permitting processes. Other countries, like the United Kingdom and Canada, also have stringent regulations to address the environmental and safety concerns associated with fracking. The economic benefits of hydraulic fracturing extend beyond energy security. The fracking boom has revitalized local economies, particularly in regions rich in shale resources. It has spurred job creation in various sectors, from drilling and production to transportation and services. The influx of investment in infrastructure and technology related to fracking has generated substantial tax revenues for state and local governments, further stimulating economic growth. Additionally, the increased supply of natural gas has led to lower energy prices, benefiting consumers and industries alike by reducing operating costs and enhancing competitiveness. Environmental considerations also play a significant role in the growing market for hydraulic fracturing.
Market Drivers
• Increased Global Energy Demand: One of the primary drivers of hydraulic fracturing is the growing global demand for energy. As populations rise and economies expand, particularly in developing countries, the need for reliable and affordable energy sources intensifies. Hydraulic fracturing has unlocked vast reserves of natural gas and oil, providing a substantial supply to meet this burgeoning demand. The ability to access shale formations that were previously uneconomical to exploit has significantly boosted energy production, ensuring a steady supply to meet both current and future energy needs.
• Technological Advancements: Innovations in drilling and extraction technologies have been crucial in propelling the hydraulic fracturing market. Techniques such as horizontal drilling combined with hydraulic fracturing have made it possible to extract oil and gas more efficiently and cost-effectively. These advancements have reduced the costs associated with fracking, making it a viable option even when oil prices are relatively low. Moreover, improvements in monitoring and managing fracking operations have enhanced safety and environmental performance, further driving the market.
Market Challenges
• Environmental Concerns: Hydraulic fracturing faces significant environmental challenges, including concerns about water usage, potential groundwater contamination, and induced seismic activity. The process requires large volumes of water, which can strain local resources, and the chemicals used in fracking fluid pose a risk of contaminating groundwater supplies. Additionally, the injection of fracking fluids can cause minor earthquakes, raising public and regulatory concerns. Addressing these environmental impacts requires ongoing innovation, stringent regulations, and effective management practices.
• Regulatory and Public Opposition: The fracking industry operates under a complex regulatory environment that varies by region and is subject to change. Public opposition to fracking, driven by environmental and health concerns, can lead to stricter regulations and even bans on fracking in certain areas. Navigating this regulatory landscape is challenging for the industry, as it must balance compliance with maintaining operational efficiency and profitability. The need to engage with stakeholders and demonstrate a commitment to environmental stewardship is crucial for the industry's sustainability.
Market Trends
• Shift towards Cleaner Energy: There is a noticeable trend towards cleaner energy sources globally, driven by efforts to combat climate change and reduce greenhouse gas emissions. Natural gas, which is abundant and accessible through hydraulic fracturing, is seen as a cleaner alternative to coal. This transition is supported by policies and incentives promoting the use of natural gas for electricity generation and other applications. As a result, the demand for natural gas extracted through fracking is expected to grow, positioning it as a key component of the global energy mix during the transition to renewable energy sources.
• Technological Innovations for Sustainability: The industry is increasingly focused on developing technologies that enhance the sustainability of hydraulic fracturing. Innovations in water recycling and reuse, reduction of chemical usage, and improvements in methane capture are becoming more prevalent. These advancements aim to mitigate the environmental impacts of fracking and comply with stricter regulatory standards. Additionally, digital technologies and data analytics are being used to optimize fracking operations, improve efficiency, and reduce environmental footprints. The trend towards sustainable practices is likely to shape the future of hydraulic fracturing, ensuring its viability in a changing energy landscape.
Water-based fluid is leading in hydraulic fracturing primarily due to its effectiveness in creating and maintaining fractures in shale formations, making it a cost-effective and efficient medium for extracting hydrocarbons.
The widespread use of water-based fluids in hydraulic fracturing is driven by several key factors that make them particularly effective and efficient for this application. Firstly, water's high viscosity allows it to transport proppants, such as sand, deep into the fractures created within shale formations. These proppants are crucial as they keep the fractures open, allowing oil and gas to flow more freely to the wellbore. The ability to carry and place proppants effectively ensures the sustained productivity of the well, which is essential for the economic viability of hydraulic fracturing operations. Water is also readily available and relatively inexpensive, especially compared to other potential fracturing fluids like oil-based or foam-based fluids. This cost-effectiveness is a significant advantage, particularly for large-scale operations that require substantial volumes of fracturing fluid. The logistics of sourcing, handling, and transporting water are well-understood and straightforward, which further contributes to its dominance in the industry. In addition to its practical and economic benefits, water-based fluids can be easily modified with various additives to enhance their performance. These additives can adjust the viscosity, control fluid loss, and improve the overall efficiency of the fracturing process. The flexibility to tailor the fluid properties to specific geological conditions and operational requirements makes water-based fluids highly versatile and adaptable. Moreover, the infrastructure and technology required for using water-based fluids are well-established. The equipment for mixing, pumping, and managing these fluids is standard in the industry, which streamlines operations and reduces costs. The extensive experience and familiarity with water-based fracturing fluids mean that operators can rely on proven methods and best practices to achieve optimal results. Despite the clear advantages, the use of water in hydraulic fracturing does raise environmental concerns, particularly regarding water consumption and the potential for groundwater contamination. However, ongoing advancements in water management technologies are addressing these issues. Techniques such as water recycling and treatment are increasingly being implemented to minimize freshwater use and reduce the environmental impact. These improvements not only make hydraulic fracturing more sustainable but also help to mitigate regulatory and public concerns.
Horizontal wells are leading in hydraulic fracturing because they significantly increase the exposure of the wellbore to the productive rock formations, thereby maximizing hydrocarbon extraction and improving the economic viability of the operation.
Horizontal drilling has become the predominant method in hydraulic fracturing due to its ability to vastly enhance the efficiency and output of hydrocarbon extraction. Unlike traditional vertical wells, which penetrate the rock formation at a single point, horizontal wells extend laterally through the reservoir, often for several thousand feet. This extensive lateral reach allows the wellbore to intersect a much larger volume of the productive rock formation, thereby increasing the contact area with the reservoir. As a result, horizontal wells can access more oil and gas from the same vertical depth, significantly boosting the recovery rates compared to vertical wells. The increased exposure to the reservoir means that hydraulic fractures created along the horizontal section can propagate more effectively, facilitating the flow of hydrocarbons into the wellbore. This maximization of resource extraction from a single well reduces the need for multiple vertical wells, leading to lower drilling costs and minimizing surface disruption. Additionally, the ability to steer the drill bit horizontally through the most productive zones allows operators to target specific layers within the reservoir that have higher concentrations of oil and gas. This precision drilling not only improves the yield but also enhances the economic viability of the operation by optimizing resource recovery and reducing waste. Furthermore, advancements in drilling technology and real-time monitoring have made horizontal drilling more efficient and reliable, supporting its widespread adoption in the industry. The combination of these factors—enhanced recovery rates, cost efficiency, reduced environmental impact, and technological advancements—establishes horizontal wells as the leading choice in hydraulic fracturing, driving their dominance in modern oil and gas extraction practices.
Plug and Perf technology is leading in hydraulic fracturing because it offers precise control over fracture placement and allows for the efficient segmentation of the wellbore, maximizing hydrocarbon recovery and optimizing well performance.
Plug and Perf technology has emerged as the leading method in hydraulic fracturing due to its superior ability to control and optimize the fracturing process in horizontal wells. This technique involves sequentially isolating and fracturing specific sections of the wellbore, which is crucial for effectively managing the complex geology of shale formations. The process begins by using a perforating gun to create precise entry points in the well casing and surrounding rock at targeted intervals along the horizontal section of the well. These perforations allow the fracturing fluid to access the formation and initiate fractures exactly where needed. Following each perforation stage, a temporary plug is set in the wellbore to isolate the newly fractured section from the rest of the well. This segmentation ensures that subsequent stages of fracturing fluid are directed to new, unfractured sections of the wellbore, rather than dissipating into already fractured zones. This methodical approach allows operators to create a series of controlled fractures along the entire length of the horizontal well, optimizing the contact with the productive rock and enhancing the flow of hydrocarbons into the wellbore. The ability to precisely control fracture placement and progression is a significant advantage of Plug and Perf technology. By systematically fracturing the well in stages, operators can adapt to real-time data and geological variations, ensuring that each section is effectively stimulated to release maximum hydrocarbons. This precision not only improves the efficiency of the fracturing process but also enhances the overall productivity and economic viability of the well. Additionally, the temporary plugs used in this method can be drilled out after the fracturing process is complete, allowing for unobstructed production flow. The versatility of Plug and Perf technology also contributes to its leading position in the industry. It can be effectively employed in a wide range of well geometries and formation types, making it a flexible choice for different fracturing scenarios. Moreover, the modular nature of the process allows for the integration of advanced monitoring and diagnostic tools, providing operators with detailed insights into the fracturing performance and enabling continuous optimization.
Shale gas application is leading in hydraulic fracturing because it unlocks vast reserves of natural gas that were previously inaccessible, providing a substantial and economically viable energy source that supports energy independence and lowers greenhouse gas emissions.
The prominence of shale gas applications in hydraulic fracturing is primarily driven by the ability of this technology to unlock immense reserves of natural gas contained within shale formations, which were previously considered uneconomical to extract using conventional methods. Shale formations are characterized by their low permeability, meaning that the gas they contain cannot flow freely to a wellbore. Hydraulic fracturing, however, involves injecting high-pressure fluid into the shale rock to create fractures, thereby increasing its permeability and allowing the trapped gas to flow into the wellbore and be extracted. This technique has revolutionized the energy landscape, particularly in the United States, where large shale formations like the Marcellus, Barnett, and Bakken have been extensively developed. The economic viability of shale gas extraction is a major factor in its leading position. Hydraulic fracturing has made it possible to produce natural gas at competitive costs, contributing to a significant increase in domestic energy production. This surge in production has bolstered energy security by reducing reliance on imported oil and gas, enhancing the geopolitical stability of energy supplies. Furthermore, the abundance of shale gas has led to lower energy prices, benefiting consumers and industries and stimulating economic growth. Environmental considerations also play a crucial role in the leading status of shale gas applications. Natural gas is the cleanest-burning fossil fuel, producing lower levels of greenhouse gases and other pollutants compared to coal and oil. The shift from coal to natural gas for electricity generation has been a significant factor in reducing carbon emissions in countries like the United States. This transition aligns with global efforts to combat climate change and promotes the use of cleaner energy sources, making shale gas a favorable option in the energy mix. Technological advancements have further solidified the dominance of shale gas applications in hydraulic fracturing. Innovations in horizontal drilling and multi-stage fracturing have enhanced the efficiency and effectiveness of gas extraction from shale formations. These technologies allow for the precise targeting of gas-rich zones within the shale, maximizing production and minimizing environmental impact. Additionally, continuous improvements in water management, recycling, and treatment technologies address environmental concerns associated with water use and contamination, making the process more sustainable.
North America is leading in hydraulic fracturing primarily due to its abundant shale reserves, coupled with a favorable regulatory environment, advanced technology, and substantial investment in infrastructure.
North America's leadership in hydraulic fracturing is rooted in a combination of geological, regulatory, technological, and economic factors that have created an optimal environment for the widespread adoption and development of this technique. Firstly, the region is endowed with vast shale formations that contain significant quantities of natural gas and oil. Major shale plays, such as the Marcellus, Barnett, Bakken, and Eagle Ford, have been identified and extensively developed, providing a substantial resource base that drives the industry. The geological characteristics of these formations, which are amenable to hydraulic fracturing, have facilitated their exploitation and established North America as a powerhouse in shale gas and oil production. The regulatory environment in North America, particularly in the United States, has been conducive to the growth of hydraulic fracturing. While environmental regulations are in place to ensure safe and responsible development, the overall regulatory framework has been supportive of the oil and gas industry. Policies and incentives at both federal and state levels have encouraged exploration and production activities, providing a stable and predictable environment for investment. This regulatory support has been crucial in fostering innovation and allowing companies to develop and deploy advanced hydraulic fracturing technologies. Technological advancements have played a pivotal role in North America's dominance in hydraulic fracturing. Innovations in horizontal drilling and multi-stage fracturing have significantly enhanced the efficiency and cost-effectiveness of extracting hydrocarbons from shale formations. The region's robust technological infrastructure, including access to cutting-edge equipment and expertise, has enabled continuous improvements in fracking techniques. Real-time monitoring, data analytics, and precision drilling technologies have optimized well performance and reduced operational risks, further solidifying North America's leadership in the field. Economic factors also contribute to North America's leading position. The substantial investment in infrastructure, including drilling rigs, pipelines, and processing facilities, has created an extensive and integrated network that supports the hydraulic fracturing industry. This infrastructure ensures efficient production, transportation, and processing of natural gas and oil, reducing costs and enhancing the overall viability of fracking operations. Additionally, the presence of a well-developed financial sector that provides access to capital has enabled companies to invest in large-scale projects and pursue technological innovations. Moreover, the entrepreneurial spirit and competitive nature of the North American oil and gas industry have driven rapid growth and adaptation. Companies in the region have been quick to adopt new technologies, optimize operational efficiencies, and explore new shale plays. This dynamic and innovative approach has kept North America at the forefront of the hydraulic fracturing industry.
• In June 2023, NexTier Oilfield Solutions and Patterson-UTI Energy, Inc. announced that they have entered into a definitive merger agreement to combine in an all-stock merger of equals transaction. The combined company will be an industry-leading drilling and completions services provider with operations in the most active major U.S. basins.
• In Apr 2023, Halliburton transferred three hydraulic fracturing fleets from natural gas basins to oil basins, the company stated. The US oilfield services behemoth revealed during its first-quarter 2023 earnings call that in a weaker natural gas market, customers had requested that the company relocate three of its fleets to oil basins. E-fleets were diesel-free hydraulic fracturing fleets that were typically powered by gas turbines and electricity.
• In January 2023, ProFrac Holding Corp. acquired REV Energy Holdings, LLC (""REV""), a privately owned pressure pumping service provider with operations in the Eagle Ford and Rockies. ProFrac paid $140 million for REV. The acquisition will expand ProFrac's presence in both South Texas and the Rockies.
Considered in this report
• Historic year: 2018
• Base year: 2023
• Estimated year: 2024
• Forecast year: 2029
Aspects covered in this report
• Hydraulic Fracturing market Outlook with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation
By Fluid Type
• Water-Based
• Oil-Based
• Foam-Based
• Others (Acid-Based Fluids and Hybrid Fluids)
By Well Type
• Horizontal
• Vertical
• By Technology
• Plug & Perf
• Sliding Sleeve
By Application
• Shale Gas
• Tight Oil
• Tight Gas
• Others (Coalbed Methane (CBM),Enhanced Geothermal Systems (EGS))
The approach of the report:
This report consists of a combined approach of primary and secondary research. Initially, secondary research was used to get an understanding of the market and list the companies that are present in it. The secondary research consists of third-party sources such as press releases, annual reports of companies, and government-generated reports and databases. After gathering the data from secondary sources, primary research was conducted by conducting telephone interviews with the leading players about how the market is functioning and then conducting trade calls with dealers and distributors of the market. Post this; we have started making primary calls to consumers by equally segmenting them in regional aspects, tier aspects, age group, and gender. Once we have primary data with us, we can start verifying the details obtained from secondary sources.
Intended audience
This report can be useful to industry consultants, manufacturers, suppliers, associations, and organizations related to the Hydraulic Fracturing industry, government bodies, and other stakeholders to align their market-centric strategies. In addition to marketing and presentations, it will also increase competitive knowledge about the industry.
***Please Note: It will take 48 hours (2 Business days) for delivery of the report upon order confirmation.