Global Wheel Aligner Industry Growth and Trends Forecast to 2031

Summary

A 3D Wheel Aligner is where the front wheels of an automobile are aligned to the rear axle. It’s called a 3D Wheel Aligner because the term “thrust” refers to the direction in which the rear wheels are pushing. This direction should match as closely as possible to the direction that the front wheels are facing when positioned forward; a mismatch here can create undue stress on your car’s suspension system and wheels, as well as reduce power and your likelihood of getting good gas mileage.

A CCD Wheel Aligner, or front end alignment only deals with the two front wheels. These wheels are aligned straight toward the geometric center of the automobile, and the rear wheels and thrust direction are left alone. The theory is that the rear wheels should already be aligned with the center of the car. Depending on what type of car you have, a CCD Wheel Aligner may be all you need. In fact, before the widespread use of front wheel drive came into play, the two wheel alignments were the only alignments done for almost all cars on the road.

In a Laser Wheel Aligner, much as the name suggests, all four wheels on both axles are adjusted so they are parallel to each other, the ground, and the thrust angle of the car. Generally, the four wheel alignment should be done whenever possible and applicable, depending on the vehicle.

According to APO Research, The global Wheel Aligner market was estimated at US$ million in 2025 and is projected to reach a revised size of US$ million by 2031, witnessing a CAGR of xx% during the forecast period 2026-2031.

North American market for Wheel Aligner is estimated to increase from $ million in 2025 to reach $ million by 2031, at a CAGR of % during the forecast period of 2026 through 2031.

Asia-Pacific market for Wheel Aligner is estimated to increase from $ million in 2025 to reach $ million by 2031, at a CAGR of % during the forecast period of 2026 through 2031.

Europe market for Wheel Aligner is estimated to increase from $ million in 2025 to reach $ million by 2031, at a CAGR of % during the forecast period of 2026 through 2031.

The major global manufacturers of Wheel Aligner include Robert Bosch GmbH, Delphi, Cormach, Honeywell, JohnBean, Horiba, Actia, SGS and Haweka Australia, etc. In 2024, the world's top three vendors accounted for approximately % of the revenue.

Report Scope

This report aims to provide a comprehensive presentation of the global market for Wheel Aligner, with both quantitative and qualitative analysis, to help readers develop business/growth strategies, assess the market competitive situation, analyze their position in the current marketplace, and make informed business decisions regarding Wheel Aligner.

The Wheel Aligner market size, estimations, and forecasts are provided in terms of sales volume (Units) and revenue ($ millions), considering 2024 as the base year, with history and forecast data for the period from 2020 to 2031. This report segments the global Wheel Aligner market comprehensively. Regional market sizes, concerning products by Type, by Application, and by players, are also provided. For a more in-depth understanding of the market, the report provides profiles of the competitive landscape, key competitors, and their respective market ranks. The report also discusses technological trends and new product developments.

Key Companies & Market Share Insights

In this section, the readers will gain an understanding of the key players competing. This report has studied the key growth strategies, such as innovative trends and developments, intensification of product portfolio, mergers and acquisitions, collaborations, new product innovation, and geographical expansion, undertaken by these participants to maintain their presence. Apart from business strategies, the study includes current developments and key financials. The readers will also get access to the data related to global revenue, price, and sales by manufacturers for the period 2020-2025. This all-inclusive report will certainly serve the clients to stay updated and make effective decisions in their businesses.

Wheel Aligner Segment by Company

Robert Bosch GmbH
Delphi
Cormach
Honeywell
JohnBean
Horiba
Actia
SGS
Haweka Australia
Messring Systembau MSG
Hunter Engineering
Guangzhou Junliye
Zhongshan Hairuida
Sino Star (Wuxi)
RAVAmerica

Wheel Aligner Segment by Type

3D Wheel Aligner
CCD Wheel Aligner
Others

Wheel Aligner Segment by Application

Heavy Vehicle
Light Vehicle

Wheel Aligner Segment by Region

North America
United States
Canada
Mexico
Europe
Germany
France
U.K.
Italy
Russia
Spain
Netherlands
Switzerland
Sweden
Poland
Asia-Pacific
China
Japan
South Korea
India
Australia
Taiwan
Southeast Asia
South America
Brazil
Argentina
Chile
Colombia
Middle East & Africa
Egypt
South Africa
Israel
Türkiye
GCC Countries

Key Drivers & Barriers

High-impact rendering factors and drivers have been studied in this report to aid the readers to understand the general development. Moreover, the report includes restraints and challenges that may act as stumbling blocks on the way of the players. This will assist the users to be attentive and make informed decisions related to business. Specialists have also laid their focus on the upcoming business prospects.

Reasons to Buy This Report

1. This report will help the readers to understand the competition within the industries and strategies for the competitive environment to enhance the potential profit. The report also focuses on the competitive landscape of the global Wheel Aligner market, and introduces in detail the market share, industry ranking, competitor ecosystem, market performance, new product development, operation situation, expansion, and acquisition. etc. of the main players, which helps the readers to identify the main competitors and deeply understand the competition pattern of the market.
2. This report will help stakeholders to understand the global industry status and trends of Wheel Aligner and provides them with information on key market drivers, restraints, challenges, and opportunities.
3. This report will help stakeholders to understand competitors better and gain more insights to strengthen their position in their businesses. The competitive landscape section includes the market share and rank (in volume and value), competitor ecosystem, new product development, expansion, and acquisition.
4. This report stays updated with novel technology integration, features, and the latest developments in the market
5. This report helps stakeholders to gain insights into which regions to target globally
6. This report helps stakeholders to gain insights into the end-user perception concerning the adoption of Wheel Aligner.
7. This report helps stakeholders to identify some of the key players in the market and understand their valuable contribution.

Chapter Outline

Chapter 1: Introduces the study scope of this report, executive summary of market segments by type, market size segments for North America, Europe, Asia Pacific, South America, Middle East & Africa.
Chapter 2: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.
Chapter 3: Detailed analysis of Wheel Aligner manufacturers competitive landscape, price, sales, revenue, market share and ranking, latest development plan, merger, and acquisition information, etc.
Chapter 4: Sales, revenue of Wheel Aligner in regional level. It provides a quantitative analysis of the market size and development potential of each region and introduces the future development prospects, and market space in the world.
Chapter 5: Introduces market segments by application, market size segment for North America, Europe, Asia Pacific, South America, Middle East & Africa.
Chapter 6: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product sales, revenue, price, gross margin, product introduction, recent development, etc.
Chapter 7, 8, 9, 10 and 11: North America, Europe, Asia Pacific, South America, Middle East & Africa, sales and revenue by country.
Chapter 12: Analysis of industrial chain, key raw materials, manufacturing cost, and market dynamics.
Chapter 13: Concluding Insights of the report.

Please Note: Single-User license will be delivered via PDF from the publisher without the rights to print or to edit.